User manual

7
Electrical Operation
1. DC 12V
The refrigerator should only be used while the motor is running. Otherwise
the on-board-battery would be discharged within a few hours !
2. Mains Power
This option should only be selected where the supply voltage of the connection
for power supply corresponds to the value specified on the data plate.
Any difference in values may result in damage the appliance.
5.2.2
2. Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.
A
1. Set energy selector switch
(A) to 12V .
Operating display C, 12V
lights green.
Appliance is in function.
C
If the operating display fails to light up the device is not in operation.
(For troubleshooting see 5.13)
B
2. Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.
A
1. Set energy selector switch
(A) to 230V .
Operating display C, 230V
lights green.
Appliance is in function.
C
If the operating display fails to light up the device is not in operation.
(For troubleshooting see 5.13)
B