User manual

8
Gas operation

The refrigerator should only be operated using liquid gas
(only propane [red bottle] ). Do not use ISO-Butane

This appliance has a sealed combustion system.

Operation using gas is prohibited in petrol stations.
1. Open the valve of the gas cylinder
2. Open the gas cock to the gas supply.
The ignition process is activated automatically, accompanied by a ticking sound
approx. 30 sec. Upon successful ignition, the display LED (C) Gas lights yellow.
The refrigerator is in function. Use rotary switch (B) to regulate the temperature in
the main refrigerator compartment.
When using for the first time, and after changing the gas cylinder, the gas pipes
may contain air. By operating the refrigerator and any other gas appliances
(e.g. cookers), air is removed from the gas pipes. The gas will then ignite
without delay.
Gas faults
In the event of a gas fault (e.g. gas cylinder empty),
the operating display (C) flashes yellow.
Remedies :
Set the energy selector switch (A) to position OFF.
1. Is there any gas in the gas bottle?
2. Is the gas bottle valve open?
3. Is the on-board shut-off valve open?
4. Set the main switch (A) to on
The reignition starts again.
If after about 30 seconds the operating display (C) starts flashing red again, the
gas fault has not been cleared (e.g. air in the gas pipe).
5. Briefly switch the refrigerator off and then on again using main switch (A).
To remove air from the gas pipes, repeat this procedure 3-4 times.
If these actions do not help, please call an authorised Dometic Service Centre.
A
3. Set energy selector switch (A) to gas
4. Set rotary switch (B) to MAX position.
C
5.2.3
C
Automatic ignition