RUC8408X--IO-AU.book Seite 1 Montag, 8.
RUC8408X--IO-AU.book Seite 2 Montag, 8.
RUC8408X--IO-AU.book Seite 3 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Please read this instruction manual carefully before installation and first use, and store it in a safe place. If you pass on the product to another person, hand over this instruction manual along with it. Table of contents 1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RUC8408X--IO-AU.book Seite 4 Montag, 8. Juli 2019 1:56 13 Explanation of symbols 1 RUC5208X, RUC6408X, RUC8408X Explanation of symbols D ! ! A I 2 DANGER! Safety instruction: Indicates a hazardous situation that, if not avoided, will result in death or serious injury. WARNING! Safety instruction: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
RUC8408X--IO-AU.book Seite 5 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X ! WARNING! • Have a qualified technician perform the installation in wet rooms. • Do not operate the device if it is visibly damaged. • If this device's power cable is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified person in order to prevent safety hazards. • This device may only be repaired by qualified personnel. Inadequate repairs may cause serious hazards.
RUC8408X--IO-AU.book Seite 6 Montag, 8. Juli 2019 1:56 13 Safety instructions RUC5208X, RUC6408X, RUC8408X • Make sure that the refrigerator circuit is not damaged during transportation. The refrigerant in the refrigerator circuit has a low potential to become flammable. In the event of any damage to the refrigerator circuit: – Avoid naked flames and sparks. – Air the room well. • Set up the device in a dry location where it is protected against splashing water. 2.
RUC8408X--IO-AU.book Seite 7 Montag, 8.
RUC8408X--IO-AU.book Seite 8 Montag, 8. Juli 2019 1:56 13 Technical description RUC5208X, RUC6408X, RUC8408X 6 Technical description 6.1 Description The device can refrigerate goods to +8 °C to 0 °C and keep them cool. Products can be frozen to –10 °C to –20 °C in the freezer compartment. You can use the control display to set the desired temperature. The refrigerator is suitable for use with 12 V or 24 V DC voltage and can therefore be used e.g. for mobile homes, caravans or on boats.
RUC8408X--IO-AU.book Seite 9 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X 6.2 Technical description Components RUC5208X 1 11 3 10 9 4 8 7 5 6 No. in fig.
RUC8408X--IO-AU.book Seite 10 Montag, 8. Juli 2019 1:56 13 Technical description RUC5208X, RUC6408X, RUC8408X RUC6408X, RUC8408X 2 1 13 12 2 11 3 10 9 4 8 7 5 6 No. in fig.
RUC8408X--IO-AU.book Seite 11 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X No. in fig. 2 Technical description Quantity Description RUC6408X RUC8408X 6.3 11 Control and display elements 12 Freezer shelf 13 Freezer compartment 1 1 Control and display 3 The refrigerator has a display and a control knob above the refrigerator door (fig. 3). Function of the control knob (fig. 3): • Rotate: Choose menu item. The selected menu item is highlighted.
RUC8408X--IO-AU.book Seite 12 Montag, 8. Juli 2019 1:56 13 Installing the refrigerator RUC5208X, RUC6408X, RUC8408X 7 Installing the refrigerator 7.1 Preparing the installation When installing the refrigerator, note the following: • Ensure that the floor is solid and level. • Ensure that the refrigerator is level. • The refrigerator must be installed so that it is easily accessible for service work, easy to de-install and install and can be easily removed from the vehicle.
RUC8408X--IO-AU.book Seite 13 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Installing the refrigerator 5 C W A H D B • The refrigerator must be installed in a recess so that it stands secure when the vehicle is in motion. Note the following dimensions (fig. 4 and fig.
RUC8408X--IO-AU.book Seite 14 Montag, 8. Juli 2019 1:56 13 Installing the refrigerator RUC5208X, RUC6408X, RUC8408X Installation with two rear vents • The air inlet and outlet vents must not be covered by vehicle parts (such as an open door or by installing accessories such as bicycle racks) while operating. • Install the refrigerator so that it is protected from excessive heat, as this leads to poor performance and increases the power consumption of the refrigerator.
RUC8408X--IO-AU.book Seite 15 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Installing the refrigerator • The outer wall must be fitted with one air inlet ventilation grille (fig. 6 2a, page 14) and one outlet ventilation grille (fig. 6 2b, page 14) so that the heat generated can be easily released to the outside: – Lower air inlet vent LS300 can be installed from flush to the vehicle floor up to a maximum height (top of vent) of 250 mm below the compressor shelf.
RUC8408X--IO-AU.book Seite 16 Montag, 8. Juli 2019 1:56 13 Installing the refrigerator RUC5208X, RUC6408X, RUC8408X Pos. in Description fig. 7, page 15 • 1 Maximum height is equal to 100 mm below the compressor shelf 2 LS300 ventilation grille 3 Roof vent A roof vent may be installed instead of the air outlet vent. – The roof vent should be installed directly above the back of the refrigerator as far as this is possible. Use an air duct if you need to install the roof vent (fig.
RUC8408X--IO-AU.book Seite 17 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Installing the refrigerator 9 2. 1. ➤ Apply the sealing strip to all four sides of the bottom surface of the refrigerator (1. in fig. 8 and fig. 9). ➤ Push the refrigerator into position (2. in fig. 8 and fig. 9). This then seals the space behind the refrigerator to the interior of the vehicle.
RUC8408X--IO-AU.book Seite 18 Montag, 8. Juli 2019 1:56 13 Installing the refrigerator a RUC5208X, RUC6408X, RUC8408X 1 2 – Push the bottom trim piece with the four plugs (fig. a 1) into the holes on the front frame of the refrigerator. – Snap the three catches (fig. a 2) into the holes under the bottom frame of the refrigerator. 7.3 Installing the drain water hose ➤ To avoid damage to the drain water hose, position the hole for the drain water hose in a way that the hose does not kink.
RUC8408X--IO-AU.book Seite 19 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X 7.4 Installing the refrigerator Installing the ventilation grille b 3 2 1 No. in fig. b Description 1 Slider 2 Ventilation grille 3 Installation frame ➤ Make a cut out in the wall to fit an appropriate upper and lower vent system, choose LS300 check the dimensions required for the vent. See chapter “Preparing the installation” on page 12. c d ➤ Ensure the installation frame is water resistant (fig. c).
RUC8408X--IO-AU.book Seite 20 Montag, 8. Juli 2019 1:56 13 Installing the refrigerator RUC5208X, RUC6408X, RUC8408X ➤ Insert the installation frame and screw it down tightly (fig. d). Use all the fixing holes for this. e 2. 3. 1. ➤ Fit the ventilation grille (1. and 2. in fig. e). ➤ Insert the slider and lock the ventilation grille with it (3. in fig. e). 7.5 Install the roof vent f g 1 2 No. in fig.
RUC8408X--IO-AU.book Seite 21 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Installing the refrigerator ➤ Cut out a section in the roof. Refer to the roof vent instruction manual for the required dimensions. When doing so, observe the information, see chapter “Preparing the installation” on page 12. ➤ Ensure the installation frame is water resistant (fig. g). h 1. 2. ➤ Insert the installation frame and screw it down tightly (fig. h 1). Use all the fixing holes for this.
RUC8408X--IO-AU.book Seite 22 Montag, 8. Juli 2019 1:56 13 Installing the refrigerator RUC5208X, RUC6408X, RUC8408X i 2 1 ➤ Push the screws (fig. i 1) through the plastic bushes in the sides of the refrigerator, and fasten into the recess walls. ➤ Fit the caps (fig. i 2) into the bushes.
RUC8408X--IO-AU.book Seite 23 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Connecting the refrigerator 8 Connecting the refrigerator 8.1 Connecting the refrigerator to 12 – 24 V A NOTICE! • To avoid voltage drops and loss of performance, keep the connection cable as short as possible and uninterrupted. Therefore avoid additional switches, plugs or power strips. The refrigerator can be operated with a 12 V or 24 V DC voltage supply.
RUC8408X--IO-AU.book Seite 24 Montag, 8. Juli 2019 1:56 13 Connecting the refrigerator RUC5208X, RUC6408X, RUC8408X Key to the figure Coordinate axis l ∅ A Meaning Unit Cable length m Cable cross section mm² NOTICE! Make sure the polarity is correct. ➤ Before starting up the device for the first time, check whether the operating voltage and the battery voltage match (see type plate). k - 1 ➤ Connect the cable to the refrigerator DC terminal block (1).
RUC8408X--IO-AU.book Seite 25 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Using the refrigerator Proceed as follows when you connect the refrigerator to the AC mains: ➤ Plug the connector into the AC socket. 9 Using the refrigerator A I 9.1 NOTICE! • Make sure that you only put items in the refrigerator which may be kept at the selected temperature.
RUC8408X--IO-AU.book Seite 26 Montag, 8. Juli 2019 1:56 13 Using the refrigerator RUC5208X, RUC6408X, RUC8408X • Protect the refrigerator from direct sunlight (e.g. sunshades in the windows). • Voltage fluctuations can have a negative effective on the cooling capacity. Check the cooling performance of refrigerator regularly – when using DC current during the journey – when using AC current at the site of use 9.
RUC8408X--IO-AU.book Seite 27 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X 9.4 Using the refrigerator Menu overview and navigation l CI Eco ➤ Turn/press the control knob on preferred setting and user mode option. ✓ The colour turns blue when selected. ➤ Press again to deselect.
RUC8408X--IO-AU.book Seite 28 Montag, 8. Juli 2019 1:56 13 Using the refrigerator 9.5 RUC5208X, RUC6408X, RUC8408X Display By default the display shows the following main menu: m 1 2 6 No. in fig. m 5 4 3 Description 1 The temperature bars show the set temperature: Lowest bar: lowest cooling function (warmest inner temperature) Highest bar: highest cooling function (coldest inner temperature) Blue snowflake: compressor is on. White snowflake: compressor is off.
RUC8408X--IO-AU.book Seite 29 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X No. in fig. m Description 4 5 Using the refrigerator The child lock is selectable by user to prevent accidental adjustments or children from using the controls. The lock activates approx. 10 seconds after the last control knob touch and the display dims. Temporary override: Push the control knob 3 times within 1.5 seconds to unlock the controls temporarily.
RUC8408X--IO-AU.book Seite 30 Montag, 8. Juli 2019 1:56 13 Using the refrigerator No. in fig. m Description 6 Turbo mode: The coldest setting (level 5) is activated. The outer fan and compressor operate at high speed and the defrost function is disabled. Turbo mode is active for 12 hours or until the refrigerator reaches a temperature of –2 °C. After that, the control switches to performance mode automatically. After switching to performance mode, the temperature setting remains at level 5.
RUC8408X--IO-AU.book Seite 31 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X 9.7 Using the refrigerator User modes The following table shows the user modes and their settings: User mode Symbol Compres- Outer sor speed fan Defrost Temperature setting Duration Performance Auto Auto Auto Levels 1 – 5 ongoing Limited Low Auto Levels 1 – 3 ongoing Eco Auto Auto Off Level 3 ongoing Turbo High High Off Coldest level (5) max. 12 hours Silent 9.
RUC8408X--IO-AU.book Seite 32 Montag, 8. Juli 2019 1:56 13 Using the refrigerator 9.9 RUC5208X, RUC6408X, RUC8408X Opening the refrigerator door/freezer compartment door p 2. 1. 1. 2. ! CAUTION! • Always close and lock the refrigerator before starting the journey. • Open the refrigerator doors carefully, because goods may have shifted and could fall out. ➤ Press the handle and pull the door open. 9.
RUC8408X--IO-AU.book Seite 33 Montag, 8.
RUC8408X--IO-AU.book Seite 34 Montag, 8. Juli 2019 1:56 13 Using the refrigerator No. in fig. q and fig. r RUC5208X, RUC6408X, RUC8408X Food 1 Frozen food 2 Dairy products, ready-made meals 3 Meat, fish, items for defrosting 4 Salad, vegetables, fruit 5 Eggs, butter 6 Dressing, ketchup, jam 7 Drinks in bottles or cartons Please observe the following instructions for storing items: I 9.12 NOTE • Do not keep carbonated drinks in the freezer compartment.
RUC8408X--IO-AU.book Seite 35 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X 9.13 Using the refrigerator Using the Door Airing Function I NOTE Use the door airing function if you do not intend to use the refrigerator for a prolonged period of time. This prevents mould from forming when the refrigerator is not in use or put into storage. s 2. 180° 3. 1. 1. 2. ➤ Rotate the locking catch 180° to latch the doors slightly opened (fig. s).
RUC8408X--IO-AU.book Seite 36 Montag, 8. Juli 2019 1:56 13 Using the refrigerator 9.14 RUC5208X, RUC6408X, RUC8408X Removing and refitting the shelves Removing the shelves t 3. 2. 1. ➤ Push the shelf locks off the left end of the wire shelf (1.). ➤ Slide the shelf to the left until it is clear on the right side (2.). ➤ Tilt the right end of the shelf up (3.). ➤ Remove the shelf by pulling it forward.
RUC8408X--IO-AU.book Seite 37 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Using the refrigerator Refitting the shelves u 3. 2. 1. ➤ Position the shelf in the desired location. ➤ Insert the ends of the shelf on the left (1.). ➤ Slide the shelf into the holes on the right (2.). ➤ Slide the plastic plugs into the holes in the wall (3.).
RUC8408X--IO-AU.book Seite 38 Montag, 8. Juli 2019 1:56 13 Using the refrigerator RUC5208X, RUC6408X, RUC8408X v ➤ Snap the shelf locks onto the shelf. Positioning the bottle shelf I NOTE The two bottom shelf positions can be fitted into an optional bottle shelf configuration which slopes down toward the rear. w 2. 1. 180° ➤ Remove the shelf and rotate 180 degrees (1.). ➤ Relocate the rear of the shelf to the bottle shelf position (2.).
RUC8408X--IO-AU.book Seite 39 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X 9.15 A I Using the refrigerator Defrosting the refrigerator manually NOTICE! Never use mechanical tools to remove ice or to loosen objects stuck to the device. NOTE • The refrigerator compartment has an automatic cyclic defrost system, which prevents excessive frost forming on the evaporator fins.
RUC8408X--IO-AU.book Seite 40 Montag, 8. Juli 2019 1:56 13 Using the refrigerator 9.16 RUC5208X, RUC6408X, RUC8408X Replacing the door panel Removing the door panel x 1. 2. Proceed as follows (fig. x): ➤ Open the door 90 degrees. ➤ Remove the door top decoration strip by gently pushing upward by hand (1.). ➤ Pull the old panel upward (2.).
RUC8408X--IO-AU.book Seite 41 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Using the refrigerator Installing the new door panel y 2. 1. Proceed as follows (fig. y): ➤ Push the new panel downwards into the door. Ensure, that the vertical edges fit into the grooves of the door frame (1.). ➤ Push the new panel downwards until the lower horizontal edge of the panel fits into the bottom groove. ➤ Snap in the decoration strip (2.).
RUC8408X--IO-AU.book Seite 42 Montag, 8. Juli 2019 1:56 13 Using the refrigerator RUC5208X, RUC6408X, RUC8408X 9.17 Reversing the door for RUC5208X I NOTE For RUC5208X door reversal, an accessory hinge and latch kit is required (not included). Contact your Dometic dealer for details. z 1 2 ➤ Open the door. ➤ Remove the top hinge pin cover (fig. z 1) using a small blade screwdriver. ➤ Pull out the top hinge pin (fig. z 2) with a pair of pliers. A 1. 3. 2.
RUC8408X--IO-AU.book Seite 43 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X I Using the refrigerator NOTE Carefully lift up the refrigerator door to prevent damaging the door bushing. ➤ Place the refrigerator door on soft material in order to prevent scratches. ➤ Remove the three screws from the lower hinge (2. in fig. A) and discard the old hinge. B 2. 1. ➤ Remove the cover from the lower hinge point (1. in fig. B). ➤ Install the cover on the opposite side (2. in fig. B).
RUC8408X--IO-AU.book Seite 44 Montag, 8. Juli 2019 1:56 13 Using the refrigerator RUC5208X, RUC6408X, RUC8408X ➤ Remove the locking catch screw (fig. C 1). ➤ Take off the locking catch and top cover (2. in fig. C). ➤ Remove the cover and bush on the hinge side with a small screwdriver (3. in fig. C). ➤ Remove the screw under the bush on the hinge side. D 1. ➤ Exchange the locking catch and the bush and install each of them on the opposite side. E 1. 1 2. 3. ➤ Remove the two screws (1. in fig.
RUC8408X--IO-AU.book Seite 45 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Using the refrigerator ➤ Use the latch assembly from the door reversing kit (not included, see chapter “Accessories” on page 7). ➤ Fit the new latch assembly and the original latch blank to the opposite sides. I NOTE Push and keep the latch spring bolt fully in during fitting. F 2 1 1. ➤ Position the refrigerator door on the hinge pin of the newly mounted lower hinge (1. in fig. F).
RUC8408X--IO-AU.book Seite 46 Montag, 8. Juli 2019 1:56 13 Using the refrigerator 9.18 RUC5208X, RUC6408X, RUC8408X Reversing the doors for RUC6408X, RUC8408X G 1 2. 1. ≥90° 3. 4. ➤ Open the freezer door more than 90 degrees. ➤ Remove the three screws (fig. G 1) from the upper hinge. ➤ Pull the upper hinge upwards out of the bushing and away from the freezer door (2. in fig. G). ➤ Remove the freezer door by lifting it up until it clears the centre hinge pin (3. in fig. G).
RUC8408X--IO-AU.book Seite 47 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X H Using the refrigerator 1. 2. ➤ Remove the refrigerator door by lifting it up until it clears the lower pin (1. in fig. H). I NOTE Carefully lift up the refrigerator door to prevent damaging the door bushing. ➤ Place the refrigerator door on soft material in order to prevent scratches. ➤ Remove the three screws from the lower hinge (2. in fig. H). I 1 1.
RUC8408X--IO-AU.book Seite 48 Montag, 8. Juli 2019 1:56 13 Using the refrigerator RUC5208X, RUC6408X, RUC8408X ➤ Remove the locking catch screws (fig. I 1). ➤ Take off the locking catches (1. in fig. I). ➤ Remove the hinge bushes on the hinge side with a small screwdriver (fig. I 2). ➤ Remove the screws under the hinge bushes on the hinge side. J 2. 1. 1 3. ➤ Secure the screws underneath the bushes on the opposite side before the covers are installed (fig. J 1).
RUC8408X--IO-AU.book Seite 49 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Using the refrigerator K 1. 1 2. 3. ➤ Remove the two screws (1. in fig. K) from the latch assembly on both doors. ➤ Push the spring bolt (2. in fig. K) inwards with a small screwdriver, until the latch assembly (fig. K 1) is released. ➤ Remove the latch assembly (3. in fig. K ) from both doors. ➤ Remove the latch blanks from the opposite side of both doors.
RUC8408X--IO-AU.book Seite 50 Montag, 8. Juli 2019 1:56 13 Using the refrigerator RUC5208X, RUC6408X, RUC8408X L 2. 1. ➤ Remove the covers from the upper and lower hinge points (1. in fig. L). ➤ Install the covers on the opposite side (2. in fig. L). ➤ Turn the former upper hinge 180 degrees and mount it to the new lower hinge position with the three screws. ➤ Position the refrigerator door on the hinge pin of the newly mounted lower hinge. M 2. 1. ➤ Put the middle pin in place (1. in fig. M).
RUC8408X--IO-AU.book Seite 51 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Using the refrigerator N 2. 1. 3. ➤ Turn the former lower hinge 180 degrees and hold it in the new upper hinge position. Take care that the hinge pin fits into the upper bushing of the freezer door (1. and 2. in fig. N). ➤ Fix the hinge with the three screws (3. in fig. N). To do so, open the freezer door by at least 90 degrees. ✓ The freezer door is now fixed.
RUC8408X--IO-AU.book Seite 52 Montag, 8. Juli 2019 1:56 13 Cleaning and maintenance 10 ! A RUC5208X, RUC6408X, RUC8408X Cleaning and maintenance WARNING! Always disconnect the refrigerator from the mains before you clean and service it. NOTICE! • Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the refrigerator. • Never use hard or sharp tools to remove ice or to free objects frozen onto the device.
RUC8408X--IO-AU.book Seite 53 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Troubleshooting In case of multiple faults, the error code will be rolling. The beep will last for 2 minutes and repeat every 30 minutes until the fault is restored. Error type faults must be manually reset by pressing and holding the control knob between 2 s and 4 s. Warning type faults reset automatically once the condition passes.
RUC8408X--IO-AU.book Seite 54 Montag, 8. Juli 2019 1:56 13 Troubleshooting Code Fault RUC5208X, RUC6408X, RUC8408X Type Icon Beep Influence on cooling 34 Compressor overloaded Error No flashing Yes Yes 35 Thermal cut-out of controller unit Error No flashing Yes Yes Compressor does not run (battery connection) Fault Possible cause Remedy Device does not function, display does not glow UTerm = 0 V The connection between the battery and electronics unit has been interrupted.
RUC8408X--IO-AU.book Seite 55 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Troubleshooting Fault Possible cause Remedy Start attempt with UTerm ≥ UON Ambient temperature too high – Insufficient ventilation Clean existing ventilation or install sufficient ventilation. Condenser is dirty Clean the condenser. Fan defective Replace the fan. Electric circuit between Defective compressor the pins in the compressor interrupted This can only be repaired by an authorised repair centre.
RUC8408X--IO-AU.book Seite 56 Montag, 8. Juli 2019 1:56 13 Troubleshooting Fault RUC5208X, RUC6408X, RUC8408X Possible cause Electric circuit between Defective compressor the pins in the compressor interrupted Remedy This can only be repaired by an authorised repair centre. Interior temperature too low on warmest control setting Fault Possible cause Remedy Compressor runs constantly Control sensor faulty This can only be repaired by an authorised repair centre.
RUC8408X--IO-AU.book Seite 57 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Warranty Water in or under the refrigerator Fault Possible cause Water is leaking into the The water drain system is clogged. inside of the Foodstuffs are preventing the water refrigerator. from flowing to the drain tube. Water is leaking onto the floor. Remedy Clean the drain. Make sure that foodstuffs do not touch the rear wall. The hose is split or not routed outside Check the drain hose at the vehicle.
RUC8408X--IO-AU.book Seite 58 Montag, 8. Juli 2019 1:56 13 Disposal 13 ! ! RUC5208X, RUC6408X, RUC8408X Disposal WARNING! Children beware Before disposing of your old refrigerator: • Dismantle the drawers. • Leave the shelves in the refrigerator so that children cannot climb inside. NOTICE! An insulating gas is used in the device (see type plate).
RUC8408X--IO-AU.book Seite 59 Montag, 8. Juli 2019 1:56 13 RUC5208X, RUC6408X, RUC8408X Power consumption at ambient temperature of 32 °C, +3 °C refrigerator: Technical data RUC5208X RUC6408X RUC8408X 240 Vw: 0.76 kWh/24 h 12 Vg: 2.4 Ah/h 240 Vw: 0.95 kWh/24 h 12 Vg: 2.8 Ah/h 240 Vw: 1.02 kWh/24 h 12 Vg: 3.
RUC8408X--IO-AU.book Seite 60 Montag, 8. Juli 2019 1:56 13 YOUR LOCAL SUPPORT YOUR LOCAL SALES OFFICE dometic.com/dealer dometic.com/contact dometicĶ ,*ű0 )"0Ŗ,= "s *+-)"1" )&01 *# *+"1& *+- ,&"0ķ 4%& % *+-/&0" 1%" *+"1& /*2-ķ , " #*2,! &, 1%" -2 )& 9)&,$0 *#ĸ DOMETIC GROUP AB "+3E/,0$ 1 , ĉč ŖĉďĉčČ *), 4"!", 4445102446 YOUR LOCAL DEALER 07/2019 dometic.