Installation Manual

EN
Installing the refrigerator RUC5208X, RUC6408X, RUC8408X
16
•
A roof vent may be installed instead of the air outlet vent.
– The roof vent should be installed directly above the back of the refrigerator as
far as this is possible. Use an air duct if you need to install the roof vent
(fig. 7 3) offset, otherwise heat will accumulate there.
7.2 Installing the refrigerator in a sealed location
separate to the living space
It is recommended to install the refrigerator in a sealed location in order to prevent
dust and heat from entering the living space of the caravan or motorhome.
A suitable seal must be provided and fitted to the bottom surface of the refrigerator.
The purpose is to provide a seal between the interior of the vehicle and the cooling
unit and ventilation area behind the refrigerator.
!
The manufacturer has applied a sealing strip to the rear surface of the front frame.
Pos. in
fig. 7, page 15
Description
1 Maximum height is equal to 100 mm below the compressor shelf
2 LS300 ventilation grille
3Roof vent
WARNING! Fire hazard!
Do not use flammable materials such as silicone sealants, foam or similar
for the draught-proof installation.
1.
2.
8
RUC8408X--IO-AU.book Seite 16 Montag, 8. Juli 2019 1:56 13