Installation Manual
EN
Connecting the refrigerator RUC5208X, RUC6408X, RUC8408X
24
Key to the figure
A
➤ Before starting up the device for the first time, check whether the operating
voltage and the battery voltage match (see type plate).
➤ Connect the cable to the refrigerator DC terminal block (1).
➤ Connect the refrigerator
– as directly as possible to the poles of the battery
– with fuse protection fitted to the positive (+) side of the supply cable of 15 A
(at 12 V) or 7.5 A (at 24 V).
8.2 Connecting the refrigerator to AC mains
D
Coordinate axis Meaning Unit
l Cable length m
∅ Cable cross section mm²
NOTICE!
Make sure the polarity is correct.
DANGER! Danger of fatal injury!
•
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
•
If you are operating your refrigerator on a boat with an AC mains
connection using a shore connection, you must install a residual
current circuit breaker between the AC mains and the refrigerator.
Seek advice from a trained technician.
-
1
k
RUC8408X--IO-AU.book Seite 24 Montag, 8. Juli 2019 1:56 13