Product Manual
EN
Operating the generator TEC29 EV AUS
30
10.3 Switching the digital control panel on and off
This switch (fig. 4 2, page 11) on the digital control panel is for switching the digital
control panel on and off.
➤ Switch the digital control panel on with the on/off switch.
✓ The display shows:
GEN OFF.
The display switches off automatically after 5 minutes if the start button is not
touched within this time.
Press and hold the start button for 4 s to switch on the display again.
✓ The generator can now be started.
10.4 Starting the generator
The generator can only be started if it is in standby and the digital control panel is
switched on.
➤ Start up the generator by pressing the start/stop button (fig. 4 3, page 11).
10.5 Stopping the generator
➤ Stop the generator by pressing the start/stop button (fig. 4 3, page 11).
If the generator does not stop: switch it off by pressing the red on/off button or
by pressing the main switch (fig. 3 1, page 10) on the internal control panel.
TEC29EV-IO-AUS.book Seite 30 Montag, 6. März 2017 8:37 20