Product Manual

EN
Operating the generator TEC29 EV AUS
34
10.8 Checking the oil level
!
I
Always check the oil level before use. To do this, proceed as follows (fig. j):
➤ Open the generator front door.
➤ Switch the generator to no function with the main switch (1).
➤ Disconnect the positive terminal of the supply battery.
➤ Take the dipstick (2) out of the filler neck (3).
➤ Clean the dipstick (2) with a cloth.
➤ Put the dipstick (2) back into the filler neck (3).
CAUTION!
Hot oil can cause burns.
Only check the oil level when the generator is switched off.
NOTE
The generator must be level.
2
3
4
1
j
TEC29EV-IO-AUS.book Seite 34 Montag, 6. März 2017 8:37 20