Product Manual

EN
Servicing the generator TEC29 EV AUS
38
12.2 Preparing maintenance work
!
➤ Switch the generator to the off position with the main switch (fig. j 1, page 34).
➤ Disconnect the positive terminal of the supply battery.
➤ Open the generator front door.
For maintenance work, you can take the generator out (fig. k):
!
➤ Undo the fastening screws (1).
➤ Remove the mounting plate (2) with the generator from the housing (3).
CAUTION!
Note the following for all maintenance work:
• The generator must not be running.
• All the parts must be cooled down.
WARNING!
The mounting plate with generator is very heavy (> 40 kg) and could fall
out the housing if you take it out too far.
1
1
3
2
k
TEC29EV-IO-AUS.book Seite 38 Montag, 6. März 2017 8:37 20