INSTRUCTIONS FOR USE INSTALLATION INSTRUCTIONS DOMETIC - ABSORBER - REFRIGERATOR RGE 2000 Please state for future reference : DE EN FR IT Typ C40 / 110 822 6100-53 Deutsch English Français Italiano Model number ............................................. Product number ............................................. Serial number .............................................
via INTERNET www.dometic.com Kundeservice Kundendienst Εξυπηρέτηση Πελατών Customer Service Servicio de Atención al Cliente Service après-vente Servizio Clienti Klantenservice Kundeservice Serviço de Atendimento a Clientes Asiakaspalvelu Kundservice Safety instructions Instructions for storing food in a refrigerator: No refrigerator of any kind can improve the quality of the food; refrigerators can only maintain the food's quality for a short duration as from the time of storing it.
INHALTSVERZEICHNIS Information 1.0 INTRODUCTION 4 2.0 FOR YOUR SAFETY 4 2.1 2.2 Warning and safety notices Coolant 4 4 WARRANTY AND CUSTOMER SERVICE 5 3.1 5 3.0 4.0 5.0 DESCRIPTION OF MODEL 5 4.1 4.2 4.3 5 5 6 Model Technical Data Declaration of conformity INSTALLING THE REFRIGERATOR 6 5.1 5.2 6.0 Damages in transit Mounting and connecting Cleaning 6 8 OPERATING THE REFRIGERATOR 9 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 6.15 6.16 6.
1.0 INTRODUCTION You have made an excellent choice in selecting the Dometic Absorption Refrigerator. We are sure that you will be fully satisfied with your new appliance in all respects. The appliance, which works silently, meets high quality standards and guarantees the efficient utilisation of resources and energy throughout its entire life cycle, during manufacture, in use and when being disposed of.
3.0 WARRANTY AND CUSTOMER SERVICE Warranty arrangements are in accordance with EC Directive 44/1999/CE and the normal conditions applicable for the country concerned. For warranty or other servicing, please contact our Dometic Service department. Any damage due to improper use is not covered by the warranty.
4.3 5.0 5.1 Declaration of conformity INSTALLATION OF THE REFRIGERATOR Mounting and connection This fridge is tested and approved for usage in closed rooms. Mounting the fridge, please note the following points: The room must have a cubic capacity of at least 20m³, has to be well ventilated and have a window, which can be opened or a door, leading outside.
5.1.1 Placing the gas bottle 5.1.2 Gas bottles have to stand up straight. Place the gas bottle well-ventilated. Place the gas-bottle, where it can be easily recognized in case of a fire. The distance between the gas bottle and the fridge must not exceed 1,5m. Only use bottle types and pressure regulation device that are valid in the particular country. Electrical connection The power must be supplied via a properly earthed socket outlet.
The hose has to be replaced within the intervals settled in the particular national rules. After having connected the gas bottle, a leak test at all joints and a burner flame test have to be carried out. Use a leak indicating spray or a foaming agent carrying out the leak test. After having opened the bottle valve check the joints for bubbles. Never use a naked flame to check the appliance for leaks. 5.1.
6.0 6.1 OPERATING THE REFRIGERATOR Putting in operation The cooling unit is silent in operation. When the appliance is first put into operation, there may be a mild odour which will disappear after a few hours. Ensure the living area is well ventilated. The refrigerator will take several hours to reach its operating temperature in the cooling compartment. The freezer compartment should be cold about one hour after switching on the refrigerator. 6.1.
6.1.2 Electrical operation AC 230V~ This option should only be selected where the supply voltage of the connection for power supply corresponds to the value specified on the data plate. Any difference in values may result in damage the appliance. 1. Set energy selector switch (A) to 230V . A 6.1.3 2. Use rotary switch (B) to regulate the temperature in the main refrigerator compartment. B Gas operation The refrigerator should only be operated using liquid gas (propane, butane).
6.1.4 Temperature setting cooling compartment B As shown, you are able to regulate the temperature of the cooling compartment, if necessary, by turning rotary knob (B) . Medium setting The cooling unit’s performance is influenced by ambient temperatures. Please select the medium setting for ambient temperatures between +15°C TIP and +25°C. The unit operates within its optimum performance range. Dometic refrigerators work according to the absorption principle.
6.4 Defrosting As time goes by, frost builds up on the fins. When the layer of frost is about 3mm thick, the refrigerator should be defrosted. 1. Switch off the refrigerator, as described in section “6.6 - Switching off". 2. Remove the ice cube tray and food. 3. Leave the refrigerator door open. 4. After defrosting (freezer compartment and fins free of frost), wipe the cabinet dry with a cloth. 5. Use a cloth to mop up the water from the freezer compartment. 6. Switch the refrigerator back on again.
6.7 Changing the doorhang 1. Open the door, unscrew the hinge screw and keep it to hand. 2. Take off the door by moving it in your direction. 4. 3. 2. If it is necessary to tilt or lay the fridge onto the side, wait for one hour, before taking the fridge into operation. The cooling agent runs back into the reservoir of the cooling unit. Thus a correct operating of the fridge is guaranteed. 1. 5. 6. 3. 4. Loosen hinge pin..... ... and screw it in at opposite side. 5. 6.
6.8 Changing the decor panel 1. Disassemble the door, as described in "6.7" 2. Unscrew the door strip (3 screws). 3. Remove the decor plate and insert a new decor plate 4. Screw the door strip back in position. 5. Put in door, as described above. Dimensions of the panels in mm: Model RGE 2000 6.9 Hight 718+/-1 Thickness 3,2 Assembling the doorgrip 1. The fixing points are marked on both sides. 6.10 Width 491,5+1 2. Adjust door handle at the door and screw onto it. 3.
6.11 Accessories Activated carbon filter (prevents odours) Order number : 958 046 002 Egg shelf Order number : 958 046 010 6.12 Troubleshooting Before calling the authorised Service Department, please check whether: 1. The instructions in the section "Using the refrigerator" have been followed. 2. The refrigerator is not tilted excessiveley. 3. It is possible to operate the refrigerator with an available power source. The refrigerator does not work in gas operation mode..
6.13 Maintenance Works on gas components and electrical installation may only be carried out by authorised personnel. We recommend to contact your Dometic Service Centre. It is recommended that the gas burner be inspected and cleaned as necessary at least once a year. TIP We recommend maintenance following an extended shutdown. 6.
Notices 17
Dometic GmbH In der Steinwiese 16 D-57074 Siegen www.dometic.de/caravan www.dometic.
