User manual

12
8.
Make sure that the above actions 5, 6, and 7 has
been done for the smaller chamber, too. NOW THE
ILR IS READY TO START
Check the required function of your !LR -whether it is
to be used as REFRIGERATOR or FREEZER.
FOLLOW THE RELEVANT INSTRUCTIONS AS GIVEN
ON THE FOLLOWING PAGES.
3. PREPARATIONS
1.
The Refrigerator/Freezer function selector switch is
located at left on the upper part of the compressor
compartment. This switch is accessible from outside
(fig. 18)
Normally the ILR is delivered with this switch set for
Refrigerator function.
Examine this switch, and if required, shift it to the LE f
FOR REFRIGERATOR function.
2.
Examine the display plate on the lid if it displays
`Refrigerator' function.
If not, slide it out from its frame, reverse and put it
back to display `Refrigerator' function (fig. 19)
4. TO USE A REFRIGERATOR
Fig. 18.
Fig. 19.