User manual

8
4.
Refit side cover of the compressor compartment into
position refixing the screws holding the side cover (fig.
8)
6.
INSTALL firmly the ILR on a level
floor, preferably on wooden
blocks or on a wooden platform to
protect it from damp and dirt.
(fig. 5)
Leave sufficient space on all sides
of the ILR, keep it away from the
walls for good circulation of air
around it, see below:
Back and left side should be
minimum 3 cm away from the
walls (fig. 9a)
Hinges can be pushed against the
wall
Right side should be minimum 10
cm away from the wall (fig. 9b)
7.
The ILR has 4 supporting
legs. If the ILR is not in
a level and stable position, adjust
this by adding wooden blocks or
similar under the legs.
2. INSTALLATION
Fig. 8.
Fig. 9.
Fig. 9a
Fig. 9b