User manual

9
8.
Connect the leads of the power supply cord to a
suitable 3-pin plug as shown below (fig. 10)
Lead of cord Pin of plug
Green/yellow Earth
Blue Neutral
Brown Phase
CAUTION:
DO NOT CONNECT THE ILR TO POVER SUPPLY
NOW
1.
Open the lid of the ILR. Pull up and take out a plastic
liner tube (fig. 1 1 )
2.
Remove the plug (cap) from its top and pour clean
water into the tube (fig. 12)
2. INSTALLATION
Fig. 10.
Fig. 11.
Fig. 12.