User manual

TEC 29 16

user’s manual

2.3 Instructions for the electrical connection

Make the electrical connections respecting all applicable laws and

regulations.

Warning

You will have to install a relay or commutator in the vehicle’s electrical

system (ex. the accessory AG 102) in order to prevent damaging the

generator when the external mains is connected; in this case we suggest

connecting the generator so that it has priority over the external mains

network.

For the 230 V use a cable of a standard cross-section as shown in the

table; insert it in the casing through the cable guide and connect it to

the terminals. Connect the earth wire.

Electrical connection of the battery charger

Use a cable with a suitable cross-section as shown in the table,

connecting it to the terminal and to the positive pole of the battery you

want to charge. (See picture on page 17)

2 Installation instructions