User manual

TEC 29 20
user’s manual
GB
Important
Old oil moust not be disposed of in the environment, but left to a
station specialised in the disposal and/or recycling of the same,
respecting the laws in the country where the operations are carried
out.
Use API SG or SF oil for 4-stroke engines (this indication is on the oil
can).
SAE 10W-30 oil is recommended for general use at all temperatures. If
you use monograde oil, choose the appropriate viscosity on the basis
of the average temperature of the place where the generator is installed.
To drain the old oil easier you should run the generator for roughly 3/5
minutes, in this way the oil is more fluid and will drain better through
the drain tube when you remove the drain plug. Refill the generator
with oil of the recommended type, through the oil filler.
The quantity of oil is:
0.6 Litres
3.3 Extraordinary maintenance
For some maintenance operations there is the possibility of pulling the
generator out by sliding the entire bottom of the generator on the guides
fixed to the sidewalls of the casing. To free the bottom unscrew the
fixing screws.
Changing the oil
Warning
• Hot oil can burn your skin!
• Check the oil level with the engine turned off.
3 Troubleshooting, maintenance, recycling
Fixing
screw
Fixing
screw