Operation Manual
TEC 40D
- 16 - Istruzioni per uso, manutenzione e installazione
GB
RULES FOR ADJUSTMENT AND MAINTENANCE
– Keep the appliance in a state of maximum efciency, by carrying out the planned
maintenance operations foreseen by the manufacturer. If these are properly carried out,
they will ensure the appliance provides optimum performance, a longer working life and
constant compliance with the safety requirements.
– Before carrying out any maintenance or adjustments, activate all the safety devices
provided and evaluate the need to inform the persons working on the machine and any
persons in the vicinity. In particular, make sure that the surrounding areas are adequately
marked and prevent access to any of the devices that might, if active, result in unexpected
dangers and risks to the health and safety of persons.
– Maintenance and adjustment operations must only be carried out by persons authorised
to do so, who must ensure that all the necessary safety precautions are taken and that
the procedures indicated here are complied with.
– All maintenance operations that require specic technical knowledge or special abilities
must only be carried out by qualied technicians, who have experience in the specic
sector of operation.
– All checking of the electrical parts must be carried out by qualied and authorised personnel
when the motor is off.
– To carry out maintenance operations in areas that are not easily accessible or dangerous,
ensure that suitable safety precautions are taken for yourselves and others, in full
compliance with current laws on safety at work.
– In the case of garaging or prolonged inactivity, start up the equipment at least once every
10 days and let it run for 15 minutes.
– Replace the fuses with others of the same type and amperage. Do not use fuses with
amperages higher than that indicated.
– Replace worn components with original spare parts. Use the oils and greases indicated
in the manual. All this will ensure that the machine retains the functions and safety levels
foreseen.
– Do not discard pollutants into the environment. They must be disposed of according to
current laws.