Installation Guide

Warranty Coldmachine

The accumulator is automatically charged if,

• the restart voltage is exceeded

• or the accumulator is empty and you switch the device off and on again using the

control button(fig. 2 6, page 3, does only function on VD-06).

10 Warranty

The statutory warranty period applies. If the product is defective, please contact the

manufacturer's branch in your country (see dometic.com/dealer) or your retailer.

For repair and warranty processing, please include the following documents when

you send in the device:

• A copy of the receipt with purchasing date

• A reason for the claim or description of the fault

11 Disposal

➤ Place the packaging material in the appropriate recycling waste bins, wherever

possible.

If you wish to finally dispose of the product, ask your local recycling center

or specialist dealer for details about how to do this in accordance with the

applicable disposal regulations.

NOTE

The cold accumulator can only be discharged manually if it was fully

charged beforehand.

NOTICE!

When you are discharging the accumulator, although there is an

external supply of power – for example to avoid operating noise from

the compressor – use the main switch to switch the unit off (fig. 1 B1 or

fig. 2 6, page 3).

NOTE

Please remember: Low internal temperature = high current

consumption!

DometicColdMachine50-54-55-84-85-86-94-95-96-CS-NC15_IOM_4445100001_EMEA16_20xx-xx-xx.book Page 28 Tuesday, May 4, 2021 7:24 PM