Installation manual

15
20
BRIGHTNESS
CONTRAST
50
20
PICTURE
SHARPNESS 5
SHARPNESS MODE
Video Graphics
BRIGHTNESS
Use this control to adjust the image’s black level.
COLOR
Use this control to adjust the colour level.
TINT
Controls the purity of the colours, to NTSC coded signal
standards. Tint is only applicable to video input with NTSC stan-
dard, to RGB 15kHz and YCrCb 15kHz inputs and YCrCb 32kHz
(no RI2).
SHARPNESS
Use this adjustment to increase and decrease the level of
picture detail.
SHARPNESS MODE
It allows to select the type of processing that determines the
detail. In progressive or de-interlaced video signals the Video
option is suggested, with graphic signals from a PC the
Graphic option is suggested.
FILTER
For video signals it improves the image’s horizontal/vertical
definition and sharpness.
CINEMA MODE
In Auto the de-interlacer recognizes if the video signal is
originated from a cinematographic film (resulting from Teleciné
with 3:2 or 2:2 Pull Down) and applies an interpolation algorithm
optimized for this type of signal.
Instead if the video signal does not originate from a
cinematographic film, or Off is chosen, the de-interlacer applies
a “Motion Compensated” algorithm optimized for signals
coming from a videocamera.
VIDEO TYPE
Inserts a filter that improves stability of images from video-
recorders. To toggle between Normal and VCR mode, press
the VCR key on the remote control.
BRIGHTNESS
CONTRAST
Video
S-Video
RGBS 32 kHz YCrCb 32 kHz RGB Grafico
RGBS 15kHz
YCrCb 15kHz
ADJUSTMENTS
SOURCE
COLOR
--
-
--
--
--
-
-
-
-
-
-
-
-
-
-
-
TINT
(NTSC)
SHARPNESS
SHARPNESS MODE
FILTER
adjustable/can be set
not adjustable/can not be set
CINEMA MODE
VIDEO TYPE
PHASE
FREQUENCY
VERTICAL POSITION
HORIZONTAL POSITION
INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS
RGB
Downloaded From projector-manual.com Sim2 Manuals