Installation manual

18
20
K), Low (circa 5000 degrees K).
The User option will allow you to select the colour temperatu-
re of your choice.
BLU
28
0
-16
COLOR TEMP. /USER
RED
GREEN
Gamma correction
Selects the Gamma’s correction curve. It determines the
projector’s response to the grey scale, emphasizing - more or
less - the different grades of brightness (blacks, dark, medium,
light greys, whites) in the projected image.
VIDEO
FILM
GRAPHICS
GAMMA CORRECTION
Y / C Delay
Use this adjustment in the event of horizontal colour misalignment
within the projected image. It is recommended that a colour bar
test pattern be used for this adjustment.
MAGNIFICATION
Use this adjustment to magnify the projected image (please
note the higher the magnification the poorer the quality of the
image).
Adjust the level of enlargement using the Left and Right
Arrow (the magnifying lens icon
will appear at the centre
of the image).
Select Pan (zoom button on the remote control) to choose
the area of image to enlarge, using all four arrow keys.
Via remote control, it is possible to alternate between modes,
by pressing the key.
SETUP
The installation menu gives access to features that will allow
for correct installation of the projector.
ORIENTATION
KEYSTONE
PROJECTION LENS
TEST PATTERNS
FACTORY DEFAULTS
SETUP
Downloaded From projector-manual.com Sim2 Manuals