Installation manual

24
20
A TECHNICAL SPECIFICATIONS
Horizontal frequency: from 15 to 80 kHz (up to to UXGA
format @ 60 Hz)
Vertical frequency: 40-100 Hz
Video standards : automatically selected (PAL B,G,H, I,
M,N,60, SECAM, NTSC 3.58, 4.43)
High definition video: ATSC HDTV (480p, 720p, 1080i)
Graphic standards : VGA, SVGA, XGA, SXGA, UXGA
Deinterlacer: Faroudja chip set, DCDi
™
, 3:2 pull
down sequence convertion
Colour temperature: adjustable from 5000 to 9300 degrees
K
Video processor: DTI, CTI, comb filter, noise reduction.
Sharpness, Y/C delay and NTSC tint
adjustments
Remote control: via infrared remote control and via
computer through RS232 serial
interface
Low Voltage Power Output: one 12 Vdc output, 100 mA max on
jack connectors
GENERAL
Supply: from 100 to 240 Vac, -10% +6%
tolerance
Frequency: from 48 to 62 Hz
Consumption: 180 W max
Fuse: T 3.15A H, 5 x 20 mm
Dimensions of projector: 352 mm x 174 mm x 318 mm (LxHxD)
13”-7/8 x 6”-7/8 x 12”-1/2 (LxHxD)
Weight of projector: 5.0 kg (11 lbs)
Packaging and 400 mm x 275 mm x 405 mm (LxHxD)
gross weight: 1’ 4” x 11” x 1’ 4” (LxHxD)
double reinforced carton;
expandable anti-shock packaging;
gross weight, including accessories:
OPTICAL
Projection system: optical engine based on 1 DMD™
chip, sealed housing, dusty proof
DMD™ panel: resolution 1024x576 pixel
Brightness uniformity: 10% above or below the average
Contrast ratio: > 1800:1 (full On / full Off)
Projection lens: zoom, 12 elements AR multilayer
coating, motorized focus and zoom,
manual elevation
Aperture f#: 2.7 (zoom max) - 3.3 (zoom min)
Picture size: 50-250 inches (diagonal measure)
Aspect ratio: 4/3 and 16/9
Throw ratio: 2.2:1 - 3:1
(throw distance: picture width)
Focus range: 2.2 - 13.0 m (7’ 3” - 42’ 8”)
Throw Distance: 60” : 3,0m - 4,1m (10’ 0”-13’ 7”)
80” : 4,0m - 5,5m (13’ 3”-18’ 3”)
100” : 5,0m - 6,8m (16’ 7”-22’ 7”)
Keystone adjustement: up to 28° (optical: ± 10° digital: ±18°)
Lamp: 120 W UHP
Lamp life time: 6000 hours (average value measured
in the laboratory under optimal condi-
tions; it can be sensibly reduced by
the unit misusing)
ELECTRICAL
Input Signals: CVBS on RCA/Phono type connector
S-VHS on Mini-DIN connector
RGBHV on DB15HD connector
RGBS / YCrCb on RCA/Phono type
connector
Downloaded From projector-manual.com Sim2 Manuals