User's Guide
Table Of Contents
- SOLO7 Transmitter User Guide
- 0. Preface
- 1. Product Overview
- 2. Product Package
- 3. Controls, Connections and Indicators
- 4. Getting Started
- 5. Domo Device Controller Operation
- 6. Advanced Operation
- 7. Appendix A – Reference Material
- 8. Appendix B – After-Sales Support
- 9. Appendix C – Safety and Maintenance
- 10. Appendix D – Glossary
Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 3-6
3.2 Rear Panel
The rear panel will accommodate the supplied CA3186 to provide DC power (in conjunction with CA0002),
video and audio inputs.
No Item Used for...
1 16-way Hirose 3500
series socket
Connect CA3186 here to provide DC power (in conjunction with
CA0002), composite video and audio inputs.
Data signals also provided are RS232 control and chained data.
Optional cables can be supplied.
2 MCX 75Ω socket
SD-SDI or ASI video input. The optional cable CA3148 will adapt the
MCX connection to BNC.
3.3 Right Side Panel
On the right side panel there is a USB control port socket for configuring the unit using the Device Controller
application. Connect the supplied AP007377 cable from the SOL7TX to a PC or laptop.