User's Guide
Table Of Contents
- SOLO7 Transmitter User Guide
- 0. Preface
- 1. Product Overview
- 2. Product Package
- 3. Controls, Connections and Indicators
- 4. Getting Started
- 5. Domo Device Controller Operation
- 6. Advanced Operation
- 7. Appendix A – Reference Material
- 8. Appendix B – After-Sales Support
- 9. Appendix C – Safety and Maintenance
- 10. Appendix D – Glossary
Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 4-12
Basic Setting Options Description
Video source format Automatic
PAL
NTSC
NTSC NP
Select the video format that matches the camera
you are using.
Alternatively, the Automatic setting determines
the video source.
Power up standard in Automatic mode defaults to
PAL. This can be changed by setting the input to
NTSC NP for example and then back to Automatic.
Encryption mode Off
ABS
AES128
AES256
All Transmitters have ABS, but the AES modes are
all license dependent.
Encryption key
Dialog entry Enter the encryption key.
ABS=8 characters
AES128=32 characters
AES256=64 characters
Range Mode Slider adjustment Move the slider towards the left to get shorter
ranges but higher picture and audio quality.
Video Quality Slider adjustment The options will differ dependent on video and
range settings.
Move the slider to the left to get lower resolution
at a higher frame rate.
Note: Some modulation and encryption modes are licensed features. Unlicensed features may be marked
with a padlock icon.