User's Guide

Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-13
5. Domo Device Controller Operation
5.1 Introduction
To get the most from your radio system you must customise the programming for your operations and area.
The SOLO7 Transmitter uses the Domo Device Controller software running on your PC which enables you to
perform many configuration tasks quickly and easily. These next topics tell you how to connect your PC to
the Nano Transmitter and then use your Domo Device Controller to configure the unit.
If the Device Controller menu shows a ‘lock’ symbol next to a feature, this means that it is not
available for your device variant or that it is missing a license.
5.2 Unit Status Panel
No Name Options Description
1 RF Button Red=RF off
Green=RF on
Click to toggle RF on or off.
2 Video Lock
Red=unlocked
Green=locked
Tells you if the unit has successfully locked to the
video source.
Unlocked will also be shown if video is disabled.
3 Audio Lock Red=unlocked
Green=locked
Tells you if the unit has successfully locked to the
audio source.
Unlocked will also be shown if audio is disabled.