User's Guide
Table Of Contents
- SOLO7 Transmitter User Guide
- 0. Preface
- 1. Product Overview
- 2. Product Package
- 3. Controls, Connections and Indicators
- 4. Getting Started
- 5. Domo Device Controller Operation
- 6. Advanced Operation
- 7. Appendix A – Reference Material
- 8. Appendix B – After-Sales Support
- 9. Appendix C – Safety and Maintenance
- 10. Appendix D – Glossary
Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-18
5.4.3 Unit Information
Name Notes
This button will copy the data to the PC clipboard. It can then be pasted into a
document, for example.
Software Version This is the version of the firmware running on the board.
Serial Number The Electronic Serial Number (ESN) of the internal PCB. The licence file will only
work with a device that has a matching ESN.
Note: This is different to the serial number on the device label.
FPGA Version The version of FPGA firmware currently running on the D1500 board. We may ask
for this number during a support call.
Temperature 0C to 59C shown in green.
60C to 84C shown in yellow.
85C or above shown in red.
An indication of the temperature of the FPGA. Attempt to keep it green.
CAUTION: If it changes to red, switch the unit off and allow it to cool.
>95°C some video encoder functionality is disabled to try and reduce
temperature; video quality will be affected.
>99°C the unit will shut down and restart to avoid permanent FPGA damage.
Base Card Info The internal RF PCB in the unit with the frequency band.