User's Guide
Table Of Contents
- SOLO7 Transmitter User Guide
- 0. Preface
- 1. Product Overview
- 2. Product Package
- 3. Controls, Connections and Indicators
- 4. Getting Started
- 5. Domo Device Controller Operation
- 6. Advanced Operation
- 7. Appendix A – Reference Material
- 8. Appendix B – After-Sales Support
- 9. Appendix C – Safety and Maintenance
- 10. Appendix D – Glossary
Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-27
5.6.3 Analogue Audio
Analogue audio will be in line with the encoder mode setting. The arrows will point to the applicable gain
value.
Name Options Notes
Level gain 0 to 66dB You can apply different levels of gain to each channel as
required.
Click on the box to edit the value.
Microphone power Off
2.0V
12.0V
48.0V
This provides phantom power to the microphone, if applicable.
Note: 12.0V and 48.0V are not applicable for the SOL7TX.
5.6.4 SDI Audio
SDI provides 16 channels of embedded audio in eight pairs. This should be left at default unless an
advanced user.