User's Guide
Table Of Contents
- SOLO7 Transmitter User Guide
- 0. Preface
- 1. Product Overview
- 2. Product Package
- 3. Controls, Connections and Indicators
- 4. Getting Started
- 5. Domo Device Controller Operation
- 6. Advanced Operation
- 7. Appendix A – Reference Material
- 8. Appendix B – After-Sales Support
- 9. Appendix C – Safety and Maintenance
- 10. Appendix D – Glossary
Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-35
5.10 Firmware Upgrade
When you need to do a software upgrade, the files will be made available through DTC’s Watchdox facility.
The upgrade file will be in the format
d1500_vx.x.all
.
Note: From software v2.0 onwards, a bespoke 64x32 pixel customer logo may be applied. The logo file can
be provided by DTC and will look like
d1500_logo_dtc.all
. To remove the logo, DTC will provide a blank file.
On the primary window in the switch panel, click the Upload button to open the Upload window. Click the
blue folder button under Upload License File and navigate to the upgrade file and select.
Click the Upload button and note the status on the Device Controller screen. The upload process may take
around 20 minutes to complete.