User's Guide
Table Of Contents
- SOLO7 Transmitter User Guide
- 0. Preface
- 1. Product Overview
- 2. Product Package
- 3. Controls, Connections and Indicators
- 4. Getting Started
- 5. Domo Device Controller Operation
- 6. Advanced Operation
- 7. Appendix A – Reference Material
- 8. Appendix B – After-Sales Support
- 9. Appendix C – Safety and Maintenance
- 10. Appendix D – Glossary
Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 7-48
Command Command Name Type R/W Scope Options
tswv Videosys software version string Read Only Global String length = 10
ttys Videosys tally status string Read Only Global String length = 20
tlma Videosys license mask hexString Read Only Global
tocc Videosys options 5600K intList
Global 0 = Enable (Filters)
1 = Disable (ECC)
tond Videosys options Hitachi ND intList
Global 0 = 5 Position (Cap)
1 = 4 Position
tosc Videosys options Sony colours intList
Global 0 = Absolute
1 = Relative (AWB)
totm Videosys options tally mode intList
Global 0 = Standard
1 = Force Record
tlic Videosys license key string Global String length = 25
Group: Data
Command Command Name Type R/W Scope Options
d1ba Data baud intList
Config 0 = 1200
1 = 2400
2 = 4800
3 = 9600
4 = 19200
5 = 38400
6 = 57600
7 = 115200
d1fo Data format intList
Config 1 = 8b None
2 = 8b Even
3 = 8b Odd
5 = 7b None
6 = 7b Even
7 = 7b Odd
d1in Data input intList
Config 0 = Off
1 = On
d1mo Data mode intList
Config 0 = Low bitrate
1 = Low latency
d1ty Data packet type intList
Config 0 = Mode 1
1 = Mode 2