User's Guide
Table Of Contents
- SOLO7 Transmitter User Guide
- 0. Preface
- 1. Product Overview
- 2. Product Package
- 3. Controls, Connections and Indicators
- 4. Getting Started
- 5. Domo Device Controller Operation
- 6. Advanced Operation
- 7. Appendix A – Reference Material
- 8. Appendix B – After-Sales Support
- 9. Appendix C – Safety and Maintenance
- 10. Appendix D – Glossary
Revision 19.1
SOLO7 Transmitter User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 2-3
2. Product Package
2.1 Packaging Overview
Verify that all the components have been included in the package as shown in the packing list. Retain the
packing list and all the packing materials for storage.
The part numbers are useful for identification and if you need to order a new part. The codes in the packing
list mean:
CA – cable assembly
SA – sub assembly
AP – assembly part
Note: If you don’t have all the parts or you are not happy with the condition of your delivered product, please
call DTC and we’ll get this solved for you. See
Section 8.2
.
2.2 Parts List
Part Number Description
SOL7TX SOLO7 Transmitter, 2452.5-2481.0MHz
AP007377 USB A to Micro USB B 1m cable
CA0002 12VDC power cable Lemo to banana plugs
CA3186 Hirose to power Lemo, video BNC(f) and audio 3.5mm jack cable
2.3 Accessory Options
If you have purchased these options, they will also be in the package.
Part Number Description
ANT2SMA-210250 2dBi omni antenna, 2.10-2.50GHz SMA (m)
CA0610 Hirose power and control cable
CA0611 Hirose power and video cable
CA0612 Hirose power, video and audio cable
CA3148 MCX 75Ω to BNC female cable
NTXBAT Li-ion battery pack 7.4V, 2250mAh 4-pin Lemo
NTXBATCH Battery charger for NTXBAT (multi-region).