User Manual
24
DO1065K
EN
USE
1. Open the lid of the appliance, and use the glass jug to add the required amount of water to the
water reservoir. Do not exceed the maximum mark.
2. Insert a paper lter into the removable lter.
3. Add the desired amount of coee to the lter and move the water discharge tube so that it is
positioned above the lter. Close the lid.
4. Insert the glass carafe horizontally into the coee maker. Put it on the keep-warm plate, under the
drip stop.
5. Plug the power cord into the outlet and press the on/o button. The indicator light will light up and
the coee maker will start brewing. You can remove the carafe from the coee maker at any chosen
time for a maximum of 30 seconds to pour coee. The appliance will stop dripping automatically.
6. The coee is ready about one minute after the coee stops dripping from the appliance.
7. The nal amount of coee will always be a little less than the amount of water you put in, because
the coee absorbs water.
8. Be careful while pouring, the coee is hot right after brewing.
9. For safety reasons it is considered wise to keep the lid on the carafe. This way the coee also stays
warm.
10. The device will keep the coee warm for up to 40 minutes. Afterwards, the device will shut o
automatically. To maintain an optimal coee taste, it is best to serve the coee right after brewing.
11. Always make sure that the coee maker is switched o and unplug the power cord from the outlet
when the appliance is not in use.
POINTERS FOR GREAT COFFEE
· A clean coee maker is essential to make great tasting coee. Clean the appliance regularly according
to the guidelines. Always use fresh, cold water in the coee maker.
· Store coee in a dry and cool place.
· Do not reuse any coee, as this will greatly aect the taste of your coee. We also do not recommend
reheating coee.
SETTING THE TIME
1. Put the plug in the socket. The display will show “12:00”.
2. Press the program button to set the time. The display will show “CLOCK”.
3. To set the correct time, press the hours button and the minutes button.
4. Once the time has been set, press the program button three times to conrm the time.
SETTING THE TIMER
1. Prepare the appliance to set coee as indicated under “use” but do not press the on/o button yet.
2. Press the program button twice to set the timer. The display will show “TIMER”.
3. To set the timer, press the hours button and the minutes button.
4. Press the program button to conrm the timer. The time and the set timer will appear on the display
alternatively. The indicator light will now turn green.
5. The coee will begin to run at the time that has been set using the timer.