Instructions for use

DO-261A
The appliance works but
does not cool off/down in
COOLING mode
A window or door is open
There is a heater or heating element switched on
The air lter is dirty
Air or inlet/outlet is blocked
The selected temperature is too high
Water is leaking from the
appliance when you move it
Empty the water collection container
Place the appliance on a at horizontal surface
Code E4 is visible on the
display
Empty the collection container
If this is a regular occurrence, contact
a recognised tter/repair service point
Code E2 The room temperature sensor
is broken and needs to be replaced
Code E3 The evaporation sensor is broken and needs to be
replaced
33