Instruction Manual
50
DO362A
EN
INSTALLATION
INSTALLATION
· This unit is designed to operate in an ambient temperature between 17°C
and 35°C. The unit will not operate correctly in a room with a lower or higher
temperature.
·
support the weight of the appliance.
· The appliance has small wheels for easy moving. Make sure only to move the
· The plug must be plugged into an appropriate outlet that is installed and
· Mount the cable storage accessory on the back of the unit.
·
· Make sure that the air outlet is brought out with the hose. Keep the opening to
the outside as small as possible so that no warm air from the outside can come
back inside.
· Make sure there is a free surrounding of at least 50 cm around the outlet.
· Make sure the air outlet hose isn’t bend during use.
The air outlet hose must be used in the “cool” or “auto” mode.
During the “fan” or “dry” mode, you don’t need to attach the air
outlet hose.
1.
other side of the hose. The connectors snap into place as soon
as you push them onto the hose.
2.
appliance connector must be mounted on the air outlet at the
back of the appliance. Slide the connector into the air outlet
holders. Make sure that the hook on the connector matches
the notch above the air outlet.
3. Place the window adapter in the window. This can be done
any openings in the window. Block the window adapter at the
desired length using the supplied window adapter plug.
4.
5. Attach the connector to the window adapter.
1.
2.
3.
4.
30cm
30cm
50cm
5.