Instruction Manual
56
DO362A
EN
SLEEP
This setting can be used during the night. It will keep a comfortable sleeping temperature and will save
energy. This function can be selected with the “cool” and “auto” setting. The symbol appears on the
another 30 min the temperature will increase with another 1°C. The air conditioning will maintain this
temperature for 7 hours. After this time, the air conditioning will go back to the original set temperature
and the “sleep” function will end.
NOTE : this function cannot be selected with the “fan” or “dry” function.
SWING
LED
Press the button again to turn the display back on.
DRAINING
During the “dry” mode you can use a permanent drainage.
1. Remove the drain plug and the rubber top.
2. Attach the drain hose on the drain.
3. Make sure the water is drained in a save and permanent way.
technology that recycles the condensation water, which means that the water tank only needs to be
emptied minimally.
·
The “cool” or “dry” mode will end automatically. The fan will continue to operate, this is normal.
· Move the unit over to a place where you can easily drain the water.
· Remove the drain plug at the bottom of your unit and drain the water.
· After fully draining the water tank, place the drain plug back on the drain opening.
·
sales service.
· NOTE : always make sure to install the drain plug, before turning the unit back on.