manual

DO9066I
42
MAKING ICE CREAM
1. Plug in the ice-cream maker.
2. Press the POWER button. The appliance is now switched on and the LCD screen
will indicate «60:00». This means that the standard set time is 60 minutes.
3. The time can be adjusted with the TIME + and TIME - buttons. Press the TIME
+ button to increase the time with intervals of 1 minute. Press TIME - to decrease
the time with intervals of 1 minute. If you want to decrease or increase the time
faster, hold down the respective button.
4. Press the START/STOP button after setting the time. The ice-cream maker will
start mixing. The background light of the LCD screen will stay lit up during the
entire process.
5. If you want to stop or restart the mixer during the process, press the START/
STOP button shortly. The compressor will still keep freezing.
6. To completely stop the process and return to the initial start-up state, hold down
the START/STOP button for longer than 3 seconds.
7. When the set time has passed, the appliance will automatically stop operating
and produce 10 beeping sounds. The LCD display will indicate «00:00» and the
background light will blink.
8. Scoop the ice cream out of the bowl with a plastic or wooden spatula and put the
ice cream into a different bowl or container. Do not use metal objects in the bowl
to avoid scratching.
Caution: Never knock the removable bowl or the edge of the bowl onto for
instance a table to remove the ice cream. This will damage the bowl.
Prolonged cooling
When the appliance is not switched off and the ice cream is not removed within 10
minutes after the end of the mixing process, the appliance will automatically switch
to prolonged cooling. The appliance will cool for another hour in total - with intervals
of 10 minutes (cool for 10 min., rest for 10 min.) - to maintain the consistency of the
ice cream. After this hour, the ice-cream maker will switch back to its initial start-up
status.
Adjusting the time during the mixing process
When the appliance is operating, you can simply adjust the duration by pressing the
TIME + and TIME - buttons.
Adding time after the mixing process
When the mixing process has ended and the appliance has switched back to its initial
start-up status, you can set the time again and press the START/STOP button to mix
the ice cream a little longer. For example because it was not hard enough yet.