Operation Manual

DO912K

PARTS

1. Temperature control knob with bulb

assembly

2. Shelves

3. Cover for vegetable container

4. Vegetable container

5. Levelling feet

6. Door shelves

7. Door bottle shelf

CARE AND MAINTENANCE

Cleaning

Do not use abrasive cleaning agents or solvents.

1. Set the temperature control knob to the OFF position and disconnect the mains

plug from the mains socket.

2. Take out the food and store in a cool location.

3. Clean the appliance with a soft cloth, warm water and detergent.

4. Wipe the door seal with clear water only and then wipe dry thoroughly.

5. After cleaning reconnect and adjust the temperature control knob as desired.

6. Put the food back into the appliance.

Bulb replacement

Beware: Unplug the appliance from the power supply before replacing the light bulb.

1. Remove the bulb cover.

2. Unscrew the old bulb and then screw a new 15W (E14 base) bulb.

3. Replace the bulb cover.

AMBIENT TEMPERATURE

This appliance is designed to operate in ambient temperature between 16°C and

38°C. If these temperatures are exceeded, i.e. colder or warmer, the appliance will not

operate correctly. If the ambient temperatures are exceeded for long periods, the

temperature in the fridge will rise above 4°C and food spoilage may occur.

BEFORE PLACING FOOD IN THE FRIDGE

• Remove all packaging.

• Allow the appliance to run empty for 2 – 3 hours so the compartment can cool to

the appropriate temperature.

• Clean the inside of the appliance with warm water and a little liquid detergent to

remove manufacturing and transportation dust.

TEMPERATURE CONTROL

The fridge is controlled with a temperature control knob located inside the appliance.

Adjust the control knob as desired to suit your individual preference.