User's Manual

Nyne TT
Quick User Guide
EN
Bluetooth Speaker Series
EN
All registered and unregistered trademarks are
property of their respective owners.
Nyne Multimedia Inc.
All rights reserved.
QUG-TT-11-3-2013-V.1.0
nyne.com
Extend the stand and place the speaker
on a hard at surface.
Connect power.
Tip: The speaker is only compatible with the original
power adapter included in the package.
Slide the power switch to the ON position.
+ The built-in battery starts charging
automatically.
Tip: The speaker is fully charged
when the indicator turns
from white to green. You can use
either the AC power or built-in
battery as power supply.
EN EN
EN
Press to power on.
+ The Bluetooth indicator ashes blue, indicating
that the speaker is in pairing mode.
Tips: If there is no power to the speaker after you
press the power button, check that:
(1) the speaker is connected to AC power or
the battery is fully charged;
(2) you have slided the power switch to the
ON position.
If the problem remains, slide the power switch
to the OFF and then ON position again.
You can press again or slide the power
switch to the OFF position to power off.
To save power, the speaker turns off
automatically after 30 minutes of inactivity.
EN