User's Manual

To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en www.iLiveElectronics.
com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance
sur www.iLiveElectronics.com
International Support
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1-888-999-4215
Email Support: [e-mail], Email Parts: [e-mail]
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
Bluetooth Setup
Charging
Pairing a Bluetooth Device for the First Time
Charging a Device
Requires a 3.5mm audio cable (not included)
1. Adjust the Source/Pair knob to
the Bluetooth/Line in setting.
2. Connect a 3.5mm audio cable to the
Line In on the unit and an audio output
on an MP3 player or other audio source.
3. Use the native controls on the
connected MP3 player or other audio
source to play and control audio
played through the clock radio.
Line In
Using the Line In
1. Make sure the unit is plugged into the
wall.
2. Using the appropriate USB charging
cable (not included), connect one end to
the mobile device and the other to the
USB Port on the unit.
Refer to the user’s manual for your
specic device for manufacturers
required charging amperage as well as
determining the appropriate cable for
your device before charging. Not suitable
for charging iPads or other large devices.
3. The device will now charge.
1. Adjust the Source/Pair knob to the
Bluetooth/Line in setting.
The Pairing Indicator will ash blue
slowly.
When pairing, remain within 3 feet of the
unit.
2. Press the Source/Pair knob
The Pairing Indicator will ash blue
quickly.
3. Using the native controls on your
Bluetooth device, select the “ISB313CW”
in your Bluetooth settings to pair.
If your device requests a password, enter
the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specic
device for instructions on pairing and
connecting Bluetooth devices.
4. When successfully paired and connected,
the Pairing Indicator will display a solid
blue light.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
If your device should become unpaired or
you nd it is unable to connect, repeat the
above steps or press the Power/Source
knob while on the Bluetooth/Line in setting
to start the pairing process pairing again.
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the
connected Bluetooth Device to select a
track.
3. To play or pause the selected track, use
the native controls on the connected
Bluetooth Device.
4. Audio played through the connected
Bluetooth device will now be heard
through the speakers.
Using Bluetooth
Playing Audio Wirelessly
1. Adjust the Source/Pair knob to the AM or
FM radio in setting.
2. Use the Tuning knob to adjust the radio
to the desired frequency.
3. Use the Volume knob to adjust the
volume.
4. Adjust the Source/Pair knob to Off
setting to turn the radio off.
Radio
Tuning the AM or FM Radio
Adjust the position of the FM Antenna to
improve FM radio reception.
An AM antenna is built into the clock radio.
To improve AM radio reception, adjust the
position of the clock radio.
Radio Reception
SOURCE/PAIR
OFF
FM
AM
/LINE IN
M
I
N
V
O
L
U
M
E
M
A
X
T
U
N
I
N
G
FM 88 91 94 98 102 106 108 MHz
AM 530 700 900 1100 1300 1500 1700
KHz
ISB313CW-818-01-IB.indd 2 4/30/2013 2:34:29 PM