DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` A DVD-VIDEO PLAYER Owner’s Manual DV6T812N DV6T512N [Hi-Fi] [MONO] ◆ In the initial settings, exclusive channel for DVD/Video is set to CH 3. Set the TV channel to CH3 before using it. ◆ Region code of DVD/Video player for home is 1 or ALL. In inserting a disc with other region code, it does not operate. Please only use a disc with region code 1 or ALL. ◆ is a ‘Prohibition’ mark. If this mark is displayed in operating the product, please wait for a while, then use it.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 1 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 2 Important Safeguards This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 3 unless the blades can be fully inserted without blade exposure. If you need an extension cord, use a polarized cord. 12 POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 4 Important Safeguards A. When the power-supply cord or plug is damaged. B. If liquid has been spilled, or objects have fallen into the unit. C. If the unit has been exposed to rain or water. D. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 5 Product Information Advantages of This Product Are .....
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 6 Read Carefully before Using Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. ✔ Installation place and handling • When you place this player near other devices, they may affect poorly together. • When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected).
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 7 ✔ Copyright • Do not use your recordings without permission of a copyrighter except personal usage. ✔ Tape and Disc Handling • Do not use any tape and disc below. Damage of video head or cut/coiling of tape may cause failure. - Tape with mold - Tape or disc stained with juice or attachments - Tape having breakage connection - Disassembled tape - Disc with severe scratch • Moisture condensation may occur in tape. Moisture condensation damages the tape.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 8 Contents Product Information DVD Operation Important Safeguards ............................................... 1 Advantages of This Product Are .... ........................ 5 Read Carefully before Using ................................... 7 Contents ................................................................... 9 Identification of Controls ....................................... 11 Remote Control .....................................................
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 9 Product Information Identification of Controls Main body (front panel) @ ! # POWER VIDEO $ QUICK COPY L AUDIO R EJECT REC - CHANNEL + DVD SELECT STOP REW PLAY/PAUSE FF OPEN/CLOSE VHS % ^ &* ( ) ! POWER (STANDBY/ON) button Use to power the device on/off if AC power supply is connected. @ Place to insert videotape # COPY button 3 4567 8 2 VCR operation display lamp 3 SELECT button Use to change DVD mode to VCR mode, and vice versa.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 10 Identification of Controls Main body (Rear Panel) ✔ DV6T812N ! #$ %^ COMPONENT OUT OUT Y R & ANT.IN IN R AUDIO OUT AUDIO L Pr L RF OUT COAXIAL DIGITAL AUDIO OUT VIDEO Pb @ ✔ DV6T512N ! * #$ %^ COMPONENT OUT R OUT Y R Pr L AUDIO OUT & ANT.IN IN AUDIO L RF OUT COAXIAL DIGITAL AUDIO OUT Pb VIDEO @ ! POWER CORD * $ COMPONENT OUT Jack It is a jack for supplying power to the unit. Connect to outlet in a wall.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 11 Product Information Remote Control ! [DVD] MENU button @ POWER button ! 6 # [DVD] TITLE /PBC button $ [DVD] OPEN/CLOSE button, [VCR] EJECT button % [DVD, VCR] MOVE/SELECT in OSD, [VCR] Channel Up/Down button VCR @ # $ DVD MENU OPEN/CLOSE & * ( OUTPUT PR + ENTER % ^ DISPLAY TITLE/PBC 0 ^ SETUP button & [DVD] REPEAT Playback button * [DVD] ZOOM button ( [DVD] OK SE D R/3 TU EA P CL PR - REPEAT ZOOM PREV.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 12 Connecting with TV ■ In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in “CHANNEL SET” screen in VCR operation. ■ In connecting RF cable to TV, set TV channel to CH3. How to Connect with RF cable, Audio/Video jack Rear Panel of DVD-VIDEO Rear Panel of TV INPUT 1 INPUT 2 Outside Antenna or Wall Antenna Outlet OUT ANT.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 13 Connecting with Cable Box ■ You should install a distributor additionally. How to connect Rear Panel of DVD-VIDEO Installation Converter Box Rear Panel of TV INPUT 1 INPUT 2 IN OUT ANT.IN IN R AUDIO OUT L ANT IN RF OUT A/B Switch RF CABLE VIDEO RF CABLE AUDIO/VIDEO CABLE If your cable system only requires you to use a converter box for some channels SPLITTER (Not supported) RF CABLE OUT IN OUT RF CABLE Cable Antenna (i.e.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 14 Connecting with Other VCR or Camcorder How to Connect with Jack in Front Panel Rear Panel of Playback VCR(CAMCORDER) Front Panel of DVD-VIDEO POWER VIDEO (L) AUDIO (R) OUT VIDEO L AUDIO R EJECT REC - CHANNEL + Rear Panel of DVD-VIDEO Rear Panel of TV INPUT 1 INPUT 2 OUT ANT.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 15 How to Copy(Edit) Tape with Other VCR or Camcorder 3 4 5 Turn on DVD-Video. Press [OUTPUT] button of remote control and adjust DVD-Video to display “External Input 1” or “External Input 2” in TV screen. Press [PLAY] button in Camcorder or playback video. Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video. Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 16 Connecting with Audio How to Connect with Stereo Unit such as Audio Rear Panel of STEREO Unit Rear Panel of DVD-VIDEO COMPONENT OUT (L) AUDIO (R) R OUT Y R Pr L AUDIO OUT ANT.IN IN AUDIO L RF OUT COAXIAL DIGITAL AUDIO OUT Pb VIDEO AUDIO CABLE 1 2 3 16 Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to IN jack of stereo sound unit. For Input Select in stereo unit, Select “External Input” connected with DVD-Video.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 17 Connecting TV with Component Jack, Amp with Digital Audio Out Jack ■ Use in S-VIDEO or COMPONENT In jack attached in TV or amp supporting Dolby Digital. How to Connect Installation Rear Panel of DVD-VIDEO COMPONENT OUT R OUT Y R Pr L AUDIO OUT ANT.IN IN AUDIO L RF OUT COAXIAL DIGITAL AUDIO OUT Pb VIDEO CONNECTING CABLE (NOT SUPPORTED) COMPONENT IN Amplifier of Dolby Digital 1 2 3 Rear Panel of TV Select COMPONENT IN to connect to TV.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 18 Clock Set ■ Set TV to CH 4 (or 3). ■ Press [VCR] button on remote control to change into VCR Mode and follow the procedure below. 1 Press [SETUP] button. Press [ENTER] button to select CLOCK SET. SETUP CLOCK SET TIMER RECORDINGS CHANNEL SET FUNCTIONS LANGUAGE SELECT Move: End: SETUP Select Time and Date Set with [ENTER] button in CLOCK SET screen.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 19 Output Select To Select DVD Press [DVD] button. If DVD mode is correctly selected, DVD on the operation display window is lighted. Then, REMOTE button works as DVD function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the OPERATION mode. POWER VIDEO QUICK COPY L AUDIO R EJECT REC - CHANNEL + DVD DVD SELECT STOP REW PLAY/PAUSE FF OPEN/CLOSE VHS Press [VCR] button.
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘ ` 20 DVD Playback 1 2 Press [ ] button to power on. Press [DVD] button of REMOTE to change into DVD mode. Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, making its label look upward. POWER VIDEO QUICK COPY L AUDIO R EJECT REC - CHANNEL + DVD SELECT STOP REW PLAY/PAUSE FF OPEN/CLOSE VHS 3 Insert the disc and press [OPEN/CLOSE] button to close the tray.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 21 Various Playback Methods ■ If you want fast playback, press [ ] button in Playback mode. You can watch fast playing screen. Every time you press the button, play speed changes in the below orders x2 x4 x8 x 20 PLAY x 2... ■ If you want fast reverse playback, Basic Operation press [ ] button in Playback mode. You can watch fast reverse screen. Every time you press the button, reverse play speed changes in the below orders x2 x4 x8 x 20 PLAY x 2...
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 22 VCR Playback 1 2 Press [ ] button to power on. 3 If you want to playback it, press [PLAY/PAUSE] button. Press [VCR] button of remote control to change into VCR mode. Insert the desired tape. POWER VIDEO QUICK COPY L AUDIO R EJECT REC - CHANNEL + DVD SELECT STOP REW PLAY/PAUSE FF OPEN/CLOSE VHS When the operational status is flickering or poor, adjust it with [TRACKING +/-] button.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 23 VCR Playback Various Playback Methods ■ If you want fast forward playback, press [ ] button in Playback mode. You can watch fast playing screen. ■ If you want fast reverse playback, press [ ] button in Playback mode. You can watch fast rewinding screen. ■ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch the desired screen in pause status. Basic Operation ■ If you want slow-motion playback, press [ ] or [ playback.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 24 Recording To Record With VCR 1 Press [ ] button to power on. 2 3 Insert a recordable tape. VCR DVD • • Press [VCR] button of remote control to change into VCR mode. Power on TV and select Ch 3, or press [INPUT] button of TV set to select External Input mode. Insert a tape with recording tab. With [CHANNEL], [NUMBER] and [OUTPUT] buttons, select the desired broadcasting channel or external input unit to record.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 25 Recording To Enjoy Another TV Channel or DVD during recording 1 2 If you want to watch another TV channel during recording with video, press [TV/VCR] button. It is available of changing into and watching another TV channel. If you want to playback DVD during recording with video, insert a DVD disc. Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT into DVD mode and press [PLAY] button. Then, you can watch DVD.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 26 Memorizing TV Channels To Memorize Automatically Channels ■ Set TV to Ch 3. ■ Prior to the setting, press [VCR] button of your REMOTE to change into VCR mode. 1 Press [SETUP] button. Press [ ] button to move into CHANNEL SET, and then select CHANNEL SET with [ENTER] button. SETUP CLOCK SET TIMER RECORDINGS CHANNEL SET FUNCTIONS LANGUAGE SELECT Move: End: SETUP 2 Select “AUTO CHANNEL SEARCH”.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 27 Memorizing TV Channels To Memorize Channels Manually When the desired broadcasting finished or you want to add unmemorized channels owing to poor signals to the memory, follow the procedures below. 1 2 Press [SETUP] button and select “CHANNEL SET”. Select “Add/Remove Channels”. Move into “Add/Remove Channels” with [ ] button and then, select the desired item with [ENTER] button.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 28 Memorizing TV Channels Selecting cable or antenna viewing You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA (antenna connection). To set the viewing mode: Press [ENTER] to toggle the setting between CABLE and ANTENNA in CHANNEL SET screen. When the desired viewing mode is displayed, press [SETUP] twice to exit.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 29 Timer Recordings TIMER RECORDINGS ■ ■ ■ ■ Power on TV. Make sure that current time is set correctly. Insert a recordable tape with recording tab. Prior to the setting, press [VCR] button to change to VCR mode. 1 2 Press [SETUP] button and select “TIMER RECORDINGS”. Move into “TIMER RECORDINGS” with [ ] and then, select the desired one with [ENTER] button. Select “Make a New Program”. Press [ENTER] button to select “Make a new Program”.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 30 Timer Recordings 6 If a recordable tape is not inserted in Stop mode under Power ON, “Waiting for TIMER RECORDINGS. Insert a recordable tape” message is displayed in the center of screen, for all changes or output conversions incurred during TIMER RECORDINGS SET. 7 Set proper “RECORDING SPEED”. Select one of SP/SLP with [ ] or [ ] button. For more information on recording speed, see “Types of Recording Speed” in the page 39.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 31 Timer Recordings Various TIMER RECORDINGS One Time : It is available of TIMER RECORDINGS at the desired specified time. Daily : Once you set TIMER RECORDINGS of the desired program telecasted at the same time day after day, it is available of daily recordings. It is available of TIMER RECORDINGS from Sunday to Saturday. Weekday : It is similar to Daily TIMER RECORDINGS, but this TIMER RECORDINGS is available from Monday to Friday.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 32 Watching and Recording Cable TV To Watch and Record Promptly Cable TV 1 Power on converter and then, set a channel to watch or to record. Power on DVD-video and then, set the channel of DVD-video to the converter-connected channel (one of CH03/04/EXTERNAL INPUT). Power on TV and then, set the video-connected channel (one of CH03/04/VCR). 2 Simultaneous Recording and Watching At this time, CH selected by the converter is displayed on TV screen.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 33 Using advanced features Play the tape automatically This feature allows the VCR to automatically start playing when you insert a tape with the safety tab removed. 1 SETUP Press [SETUP] button and select “FUNCTIONS”. Move into “FUNCTIONS” with [ ] and then, select the desired one with [ENTER] button. CLOCK SET TIMER RECORDINGS CHANNEL SET FUNCTIONS LANGUAGE SELECT Move: End: SETUP 2 Press [ENTER] to switch between ON and OFF.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 34 Using advanced features Searching a cassette tape for programs (indexing) ■ When you record a programs, the VCR places an index mark at the start of the recording. To search for an index mark: • If two recordings overlap, the index mark for the second program will be erased. Therefore, when you use the index feature to find the second program, the VCR will skip over it.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 35 Using advanced features Marking a tape for zero search 1 2 3 4 Use PLAY, REW,or FF to reach the point on the tape that you would like to mark as 0:00:00. Press [DISPLAY] button to display the tape counter on the screen. Press [CLEAR] button to reset the tape counter to 0:00:00. You can continue to play the tape or perform other functions with the VCR. Display (O.S.D) 1 2 Press [DISPLAY] button to display the tape counter, clock and status mode on the TV screen..
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 36 Using advanced features Changing the on-screen menu language You may select the language in which you would like the VCR’s menu to be displayed: English, Spanish, or French. 1 Press [SETUP] button and select “LANGUAGE SELECT”. SETUP CLOCK SET TIMER RECORDINGS CHANNEL SET FUNCTIONS LANGUAGE SELECT Move: End: SETUP 2 Select the language among English, Spanish or French by pressing [ENTER] button. LANGUAGE SELECT Select a language.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 37 Hi-Fi Stereo Playback Playing a tape in Hi-Fi high-quality • • “Hi-Fi” signal lights up in the top of a screen. Pressing [AUDIO] button changes menus one by one. Hi-Fi LINEAR MIX If there are some noises made in recording, please “Linear” to reduce them. Recording Stereo Broadcast • Stereo : It separates sounds into dual signals and transfers them in order to achieve presence in a broadcasting station.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 38 Playing a desired scene To skip scenes in a disc To move to next chapter (or track), press [ NEXT] button. The current chapter (or track) moves to the next chapter (or track). Press [ PREV] button. The current scene moves to the previous chapter (or track) or first scene of current chapter (or track). Directly moving to a desired title (DVD) Some movie discs may contain multiple titles.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 39 Playing a desired scene Playing a programmed order ■ Available only in STOP. 1 While STOP, press [PROGRAM] button. While the right figure is appearing, please input desired Title(T) and Chapter(C) number with NUMBER buttons. * In case of VCD and CD, please input TRACK Number.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 40 Playing a desired scene Repeating a defined period from A to B (DVD, VCD, CD) You may repeat a defined period from A to B. A MP3 disc may not be repeated from A to B. 1 At the point where you want to start the repeat playback, press [REPEAT] button. 2 At the point where you want to end the repeat playback, press [REPEAT] button again. 3 To exit from repeat playback mode, press [REPEAT] button.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 41 Playing a desired scene Searching VCD and CD with a track number or time 1 If you want to search with a track number, press [SEARCH] button one time. VCD T 1-2 LR OFF 00:45/30:35 LR OFF 00:45/30:35 TRACK - - - In case of PBC OFF, the screen like the right figure appears. Please enter the new track numbers to be searched using the [NUMBER] button. * If it is PBC ON, above search screen doesn’t appear.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 42 Confirming the current PLAY mode on screen Confirming the current DVD disc mode 1 While in playing, press [DISPLAY] button. 2 Press [DISPLAY] button again. 3 To exit from Display mode, press [DISPLAY] button again. T 1-2 C 1-8 ENG/3 ENG2CH/3 2:00:18 It shows the disc type, current title, current chapter and time elapsed. DI OFF 1/1 It shows the DVD disc logo, subtitle selected, audio selected, dolby digital logo, repeat playback mode and current angle.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 43 Confirming the current PLAY mode on screen Confirming the current MP3 disc mode 1 While in playing, press [DISPLAY] button. T 1/517 It shows the MP3 File information in disc, the directory, MP3 File name and directory list. With [ ] buttons, you can move the cursor to directory or number of MP3 Music File. To go to desired directory or to playback MP3 File, press [ENTER] key.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 44 Selecting an AUDIO language, SUBTITLE language and 3D AUDIO Selecting an audio language The user may select an audio language and subtitle language if a disc includes Multi-language. Keep pressing [AUDIO] button till the user’s preferred language appears. A certain disc may not support audio select or subtitle select.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 45 Selecting ZOOM and Multi Angle Using a zoom function The user can enlarge the current screen about 1.3, 1.5 or 2.0 times. Keep pressing [ZOOM] button till the preferred zoom appears. When “TV ASPECT” item is set to “4:3 PS” in setup screen, or with certain discs, 2 times Zoom may not function properly. Every time the user presses [ZOOM] button, a zoom magnification changes 1.3 times (X1.3) 1.5 times (X1.5) 2.0 times (X2.0) OFF 1.3 times (X1.3) ... one by one.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 46 Memorising a scene, Displaying menus in a disc To memorise a scene Once memorising a scene, the user may watch it anytime. “BOOKMARK” function during the disc playback of SVCD or VCD2.0 is only available in “PBC OFF” mode. Select “PBC OFF” mode by pressing [TITLE/PBC] button. 1 While playing, press [MARK] button. 2 If you want to memorise another preferred scene, press [>] button. The right figure appears.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 47 LANGUAGE Setup A user can set OSD language, Audio, Subtitle and Disc Menu. ■ Before setting it, you should change into DVD mode by pressing [DVD] button on remote control. 1 While STOP or RESUME STOP, press [SETUP] button. LANGUAGE VIDEO OSD LANGUAGE AUDIO SUBTITLE DISC MENU MOVE: 2 Selecting a OSD LANGUAGE. Please select a language to be displayed on DVD screen. ** “OSD” means “On Screen Display”.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 48 VIDEO Setup A user can set up a connected TV condition and screen. ■ Before setting it, you should change into DVD mode by pressing [DVD] button on remote control. 1 While STOP or RESUME STOP, press [SETUP] button. LANGUAGE TV ASPECT TV TYPE VIDEO OUT MOVE: 2 3 Selecting TV ASPECT. If a user selects “4:3 PS”, the user can watch only a center of the original scene of “16:9”.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 49 AUDIO Setup A user may select audio menu according to a user’s speaker set. ■ Before setting it, you should change status into DVD by pressing [DVD] button on the remote control. 1 While STOP or Resume STOP, press [SETUP] button. LANGUAGE 2 3 You can set following 2 values of digital output; • BITSTREAM: The same signal as audio signal recorded in disc goes to digital audio output terminal. • LPCM: Decoded audio signal goes to digital output terminal.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 50 Others Setup ■ Before setting it, you should change into DVD mode by pressing [DVD] button on remote control. 1 While STOP or RESUME STOP, press [SETUP] button. LANGUAGE MOVE: 2 Select character display window. Select "ON" to make OSD(On Screen Display) language displayed in screen. LANGUAGE 3 4 If bright scenes continue to be displayed in screen, TV can be damaged.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 51 Others Setup 7 Changing a password. For the change of a user’s password, please move to “CHANGE PASSWORD” and enter new password. LANGUAGE MOVE: And confirm new password. The initial password is 3308. In case you forget newly-input password, you can use 3308 as a password.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 52 About DVD Playable Disc • DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD Disc type DVD Video CD CD CD-G CD-ROM CD-R CD-RW DVD-R DVD-ROM DVD-RAM DVD+RW Photo CD Playable Possible Possible Possible Possible Possible Possible Possible Possible Impossible Impossible Impossible Impossible Restriction Region number 1 or Region number All Version 1.0/1.1/2.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 53 About DVD Terms related with DVD DVD A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages. By using MPEG-2 video compression and digital 3D surround sound, DVD realizes high-defined screen and quality sound like a movie theater.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 54 About DVD Handling Disc • • • • To keep a disc clean condition, please do not touch a side containing play information. Do not attach a bit of paper or sticky tape on it. Do not expose a disc to a direct sunlight or electric heating systems. After using it, please keep a disc in a case. Cleaning Disc • Before using it, please rub it from center toward outside with clean clothes.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 55 Basic information about VCR and Videotape Terms related with VCR AFT Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition. CABLE Cable television. EP Extended play, the slowest recording speed. Designed to store the maximum amount of program material on a single video cassette. There is some degradation in picture/audio quality.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 56 Basic information about VCR and Videotape What is a record tab of a videotape? • The tab on a videotape enables a user to record and prevents the recorded area from rerecording. • To record it, a user should use a videotape with a tab. • If a user input a videotape without a tab to record, the videotape is ejected automatically. • In order to avoid a recorded area to be rerecorded, a tab should be removed.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 57 Before doubting about troubles (DVD) Symptom Checks • The recorder does not play. ➤ If a DVD is from overseas, it may not be played. Please check a DVD’s region code whether it has the relative region code 1 or All. ➤ Please check whether a DVD is inserted in a right direction. ➤ If it is a CD-ROM for PC or DVD-ROM, it does not work. • No sound comes through.
DV6T812N-LT(GB) 02.8.5 9:24 PM ˘ ` 58 Before doubting about troubles (DVD) Symptom 58 Checks • “ANGLE” button does not work while a DVD is playing. ➤ “ANGLE” is supported only in a DVD contains multi angle scenes. Also a user can confirm the support with the “ANGLE” mark on screen. • “MENU” does not appear while a DVD is playing. ➤ Please check the degree of remote control, distance or any interruption. ➤ Please check a battery in remote control whether it is exhausted or not.
DV6T812N-LT(GB) 02.8.5 9:25 PM ˘ ` 59 Before doubting about troubles (VCR) Symptom Checks ■ Power • “Power On” does not work. ➤ Please check whether a power plug is inserted in an electric outlet. • It does not work even in “Power On”. ➤ Please check whether a videotape is inserted in. ➤ Try to insert a plug again. ■ Input and ejection • A videotape is not inputted in. ➤ Please check whether a power plug is inserted in an electric outlet. ➤ Please check whether a videotape is in.
DV6T812N-LT(GB) 02.8.5 9:25 PM ˘ ` 60 Before doubting about troubles (VCR) Symptom Checks • Noise appears on screen after recording. ➤ While in playing a videotape, there may happen some noise or blot in the part of the beginning of a videotape or resuming “PAUSE”, which are not breakdown. • While in playing, noise appears. ➤ Please press “TRACKING” for better screen. Videotape may be poor. Try to change it to another one. • Sound and screen are irregular.
DV6T812N-LT(GB) 02.8.5 9:25 PM ˘ ` 61 Before doubting about troubles (VCR) Symptom Checks • Recording a TV program is impossible. ➤ Check whether a tape attached with a recording tap is inserted. ➤ Check whether the screen is displayed in VCR Only Channel. Press [OUTPUT] button in this remote controller to adjust in "General Broadcast" condition. ➤ Is the rounded line (RF cable) connected in "ANT.
DV6T812N-LT(GB) 02.8.5 9:25 PM ˘ ` 62 Before doubting about troubles (VCR) Symptom Checks ■ Others 62 • VISS index search does not work. ➤ Are you playing a tape that is not recorded in this recorder? (Try to record it with the recorder.) ➤ You may start recording it in “REC-PAUSE”. Please start recording it from stop condition. • Cable broadcasting can not be selected. ➤ Please select “CABLE” not “NETWORK” from the “CHANNEL SETTING”.
DV6T812N-LT(GB) 02.8.5 9:25 PM ˘ ` 63 Specifications Power AC 120V, 60Hz Consumed electricity 24W (supplementary 2.5W) Weight 5.7kg Dimension (WxHxD) 430mmx91mmx355.5mm Operative temperature +5°C~35°C Installation condition Horizontal / Relative humidity under 80% Received channels VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125 Signal type NTSC COLOR Antenna Input/output U/V-mixed: 75Ω unbalanced VIDEO input 1.0 Vp-p unbalanced, RCA JACK AUDIO input -8.
DV6T812N-LT(GB) 02.8.
