User's Manual

The DVD Recorder+VCR Setup menu includes system settings in six categories such as Installation, Recording
Options, Languages, Preferences, System Info and Restore Defaults. Press [SETUP] and [œ/√] on the remote
control to view the first and second levels of the Setup menu.
Setup Menu Overview
22
1 Press [SETUP].
The Setup menu appears.
2 Use [œ/√] to select the desired option.
3 While the desired item is selected, press […/†] to move to the second level.
4 Press [ENTER] to move to the third level.
5 Use […/†] to select the desired setting then press [ENTER] to confirm your selection.
Some items require additional steps. Press [SETUP] at any time to return to the previous menu.
6 Press [SETUP] to exit the Setup menu.
Menu Navigation
Tuning Band
1
Press [SETUP].
The Setup menu appears.
2 Use [œ/√] to select the ‘Installation‘ option.
3 While the ‘Installation‘ option is selected, press [†] to select
the ‘TV/CATV‘ option.
4 Press [ENTER] to move to the second level.
5 Use […/†] to select the tuning band option (TV or CATV)
then press [ENTER].
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
INSTALLATION Settings
Initial Setup
Initial Setup
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move …†
Select The TV
Standard
TV
CATV
If the input signal mode is other than channel, like LINE1 and LINE2, tuning band is not changed.
DWL71D1D_ RV 4000(GB) 04.6.1 1:46 AM 페이지22