User's Manual

SETUP
25
Initial Setup
VCR Record Quality
You can set the default VCR recording quality to SP (Standard
Play) or SLP (Super Long Play). SP is higher quality, but SLP
provides 3 times the recording time;
e.g., a 2 hour tape will record for 6 hours in SLP mode.
Follow the same procedure as the DVD Record Quality.
Auto Chapter
During recording, chapter markers are added automatically at
fixed intervals. You can set this interval to 5 minutes, 10 minutes
or 15 minutes. To turn off automatic chapter marking, select ‘Off‘.
Follow the same procedure as the DVD Record Quality.
DVD Record Quality
You can set the default DVD recording quality to: HQ (High, 1
hr/disc), SP (Standard, 2 hrs/disc), EP (Low, 4 hrs/disc) or SLP
(Very Low, 6hrs/disc).
1 Press [SETUP].
The Setup menu appears.
2 Use [œ/√] to select the ‘Recording Options‘ option.
3 While the ‘Recording Options‘ is selected, press [†] to
select the ‘DVD Record Quality‘ option.
4 Press [ENTER] to move to the second level.
5 Use […/†] to to select the desired Record Quality (SP, SLP, EP, HQ).
6 Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
RECORDING OPTIONS Settings
Recording Options
DVD Record Quality HQ
VCR Record Quality SLP
Auto Chapter Off
Instructions
Enter-Confirm Setup-Exit
Move …†
Select Record
Quality
SLP
EP
SP
HQ
Recording Options
DVD Record Quality HQ
VCR Record Quality SLP
Auto Chapter Off
Instructions
Enter-Confirm Setup-Exit
Move …†
Select VCR
Quality
SLP
SP
Recording Options
DVD Record Quality HQ
VCR Record Quality SLP
Auto Chapter Off
Instructions
Enter-Confirm Setup-Exit
Move …†
Select Auto
Chapter
Off
5min
10min
15min
DWL71D1D_ RV 4000(GB) 04.6.1 1:46 AM 페이지25