User's Manual

• Some options cannot be reset, including Movie Rating,
Password, and Country Code.
• After Restoring Defaults the set reboots automatically and the Installation menu appears. You must set the
country, language, auto channel and clock again.
If you wish, you can reset the DVD Recorder+VCR to its original
factory settings.
1 Press [SETUP].
2 Use [œ/√] to select the ‘Restore Defaults‘ option.
3 Press [ENTER].
4 The Initialize menu will appear. Use the […/†] buttons to
select ‘Yes‘ and press [ENTER].
System Information
34
Initial Setup
This is System Information which A/S Engineer can refer to when your set is out
of order.
System Info
Chipset EP Set 1.0
Main Build DR3-1.0.2
Micom Software 0.0.0
DVD Navigation 1.0.0
Instructions
Enter-Confirm Setup-Exit
Move …†
Restore Defaults
Restore Defaults
If you select this function all
settings will be removed and
the product will be set into
initial (factory) mode.
Instructions
Enter-Confirm Setup-Exit
Move …†
Are you sure you want to restore
default settings?
Yes
No
DWL71D1D_ RV 4000(GB) 04.6.1 1:46 AM 페이지34