User's Manual

SETUP
35
On-Screen Display Overview
On-Screen Display Overview
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded
disc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button.
To display information about the currently loaded disc or tape:
On-screen display operation
1 Press [DISPLAY] repeatedly to display/change the information displayed on-screen.
2 To remove the on-screen display, press [DISPLAY] repeatedly until it disappears.
See the descriptions from current page to the next page for detailed explanations of on-screen displays for
each media type.
Temporary Feedback Icons
Action prohibited or not available
While watching TV, press [DISPLAY] to display/remove the on-screen display.
When there is no rewritable DVD disc inserted, you would see a screen like the following:
When a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the first key input. If you press
again then the TV information is displayed.
Displaying Disc Information
Displaying TV Information
Changing TV Channels
Some discs may not provide all the features shown in the on-screen display examples.
If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH
…/†] buttons on the front panel.
Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
audio output signal
current date and time
channel number
DWL71D1D_ RV 4000(GB) 04.6.1 1:46 AM 페이지35