User's Manual

Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to Broadcast audio signal as shown below.
• STEREO+SAP Audio Signal
Stereo ➝ SAP ➝ Mono ➝ Stereo
• STEREO Audio Signal
Stereo ➝ L ➝ R ➝ Mono ➝ Stereo
• SAP Audio Signal
Mono ➝ SAP ➝ Mono
• MONO Audio Signal
Mono
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
Title
Shows the current title number and total number of titles, and skips to the desired title number.
1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
2 Use […†] to select the ‘Title‘ icon on the on-screen display. Press [ENTER] to display a sub menu.
3 Use […†] to change the numbers.
4 Press [ENTER] to confirm.
36
On-Screen Display Overview
With a DVD disc inserted and played, press [DISPLAY] to show the information of the
current disc.
While the disc information is displayed, press [DISPLAY] again to show the disc
remaining time.
Changing TV Audio Channel
OSD Menu Options for DVD
DWL71D1D_ RV 4000(GB) 04.6.1 1:46 AM 페이지36