User's Manual

You can copy the contents of a DVD to a VHS tape using the [DVD ➝ VCR] button.

1 Insert a Disc.

Insert the disc you wish to copy in the DVD deck and close the disc tray.

2 Insert a VHS Tape.

Insert a blank VHS videotape into the VCR deck.

3 Select DVD mode by pressing [DVD] on the remote control or

pressing [DVD/VCR] on the front panel.

4 Find the place on the DVD (or Disc) from which you want to start

recording using the [PLAY] and [PAUSE] functions.

For best results, pause playback at the point from which you

want to record.

5 Press [DVD ➝ VCR] on the front panel.

The Copy to VCR menu appears.

6 Press [REC SPEED] to select the desired Record Mode:

• SP (Standard Play)

• SLP (Super Long Play, 3 times SP).

7 Press [ENTER] to start copying.

8 Stop the Copy Process

To stop copying at any other time, press [STOP]. You must stop

the Copy process manually when the DVD movie ends, or the

unit may replay and record over and over again.

RECORDING

One Touch Copy - DVD to VHS

Basic Recording

If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to

copy Macrovision encoded DVDs. ‘Copy-protected. Cannot record.‘ is displayed on the TV screen.

Copy to Tape

Choose speed then

press COPY:

SLP

DVD Status

■ Stop – : – – : – –

Record

Preparing the disc for recording...

Please wait a moment...

Instructions

Setup-Exit

Record

Stopping the recording & updating

the disc. This may take a few

minutes. Please wait...

Instructions

Setup-Exit

00:00:32 02:03:27

DWL71D1D_ RV 4000(GB) 04.6.1 1:46 AM 페이지47