User's Manual

RECORDING

You can record from an external component, such as a camcorder or VCR, connected to any of the DVD

Recorder+VCR’s external inputs.

1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages

15 and 18.

2 Use [ …†] to select the external input to record from.

• Tuner: Built-in tuner

• LINE1 : Audio/Video or S-Video Input on front panel

• LINE2 : Audio/Video Input on back panel

3 Load a recordable disc or tape.

4 Set the desired Recording mode by pressing [REC MODE] repeatedly.

DVD: SP (Standard Quality - 2hrs/disc), EP (Extended Play - 4 hrs/disc, HQ (High Quality - 1hr/disc), SLP

(Very Low Quality - 6hrs/disc)

VCR: SP (Standard Play), SLP (Super Long Play -3times SP)

5 Press [REC (●)] once.

Recording will start. The REC indicator lights on the front panel display.

Recording continues until you press [STOP] or the disc is full.

To record for a fixed length of time, see ‘One Touch Record‘ on page 46.

6 Press [STOP (■)] to stop recording.

Recording from External Components

Note

If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright Notice‘

on page 7 for more details.

Recording from an External Input

DWL71D1D_ RV 4000(GB) 04.6.1 1:46 AM 페이지51