User's Manual

54
Editing
Once you have finalized a DVD+R disc, you cannot edit or record anything else on that disc.
• ‘Finalize (Make Compatible)’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on
the disc, and the number of titles on the disc.
• A DVD+RW disc edited in the DVD Recorder+VCR will seem not edited if you do not 'make compatible'.
Finalize (Make Compatible)
Finalizing a DVD+R ‘locks’ its recordings in place so the disc can be played on most standard DVD players or
computers equipped with DVD-ROM drives.
'Make Compatible' for a DVD+RW will automatically create a menu screen for navigating the disc. This menu
screen is accessible by pressing [DISC MENU] or [TITLE].
1 Use […] to go to top menu.
2 Press [√] to display Disc Information Menu.
3 Press [√] and select ‘Finalize’ (‘Make Compatible’ for
DVD+RW).
4 Press [ENTER] as described on the screen.
5 Select 'Yes' using […] and press [ENTER] to finalize the disc
(make the disc compatible in the case of DVD+RW).
6 Press [ENTER] again.
7 Press [SETUP] to go to the top disc menu.
Make Compatible
Press [Enter] to make any
previous title editing
compatible with your DVD
player.
Instructions
Enter-Confirm
Make Compatible
Make disc compatible with
your DVD player.
Yes
No
Instructions
Enter-Confirm Move …†
Make Compatible
Finished.
This Disc should already
be compatible.
ok
Instructions
Enter-Confirm Move …†
Finalize
Press [Enter] to make any
previous title editing
compatible with your DVD
player.
Instructions
Enter-Confirm
Finalize
Make disc compatible with
your DVD player.
Yes
No
Instructions
Enter-Confirm Move …†
Finalize
Finished.
This Disc should already
be compatible.
ok
Instructions
Enter-Confirm Move …†
••• DVD+R disc ••• ••• DVD+RW disc •••
DWL71D1D_ RV 4000(GB) 04.6.1 1:46 AM 페이지54