User's Manual
RECORDING
41
Basic Recording
1 Insert a Disc.
Insert the disc you wish to copy in the DVD deck and close the disc tray.
2 Insert a VHS Tape.
Insert a blank VHS videotape into the VCR deck.
3 Press [COPY] on the remote control.
4 Select (DVD
➝
VCR) and press [ENTER] or [COPY] to confirm.
5 Press [REC SPEED] to select the desired Record Mode in ‘Copy to Tape’
menu:
• SP (Standard Play)
• LP (Long Play, 2 times SP).
6 Press [COPY] again to start copying.
7 Stop the Copy Process
To stop copying at any time, press [STOP]. You must stop the Copy process manually
when the DVD movie ends, or the unit may replay and record over and over again.
One Touch Copy - DVD to VHS
• If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to
copy Macrovision encoded DVDs.
• Copy to VCR does not work in Progressive Scan Mode.
If you want to start copy any point of disc
1 Find the place on the DVD (or Disc) from which you want to start recording using the
[PLAY/PAUSE], [REW] and [FF] functions.
2 Press [COPY] while DVD is in pause mode or in resume stop (
»
STOP) mode.
3 Follow the same procedure 5-7.
During one touch copy you can search or change REC SPEED and resume copy.
1 During One Touch Copy press [PLAY/PAUSE] to enter COPY EDIT mode.
2 Search with [FF/REW] or [NEXT/PREV] button.
3 Press [COPY] and you can change REC SPEED.
4 Press [COPY] again to resume copy.
Copy Edit (DVD ➝VCR)
Copy to Tape
Choose speed then
press COPY:
LP
SP
■
■ ■
Stop
Quick-Copy Menu
Please Select Quick Record Option
DVD -> VCR
VCR -> DVD
Instructions
Enter-Confirm M ove …†
DF-Q74D2N-LS(GB)_ US A 05.1.25 6:5 AM 페이지41