User's Manual

REFERENCE

When the DVD Recorder is moved from a cold place

to a warm place.

Under extremely humid conditions.

Keep the DVD Recorder plugged into an AC power

outlet with the power on. This will help prevent

condensation.

When condensation has occurred, wait a few hours

for the DVD Recorder to dry before using it.

Moisture Condensation

Troubleshooting

Moisture condensation can occur: In locations where moisture condensation may occur:

Symptom Cause Solution

All of the buttons don’t

work or DVD screen stop

suddenly.

The batteries in the remote control

are dead.

The remote control is locked.

The DVD Recorder is in the

abnormal status.

DVD Recorder has interrupted by

itself.

Replace the batteries.

Press and hold [POWER] button on font

over 5 seconds.

Press and hold [DVD/VCR] button for 5

seconds to reset the DVD Recorder.

Press [RESET] switch on the rear panel.

DVR065(GB) 2006.1.16 1:55 PM ˘ ` 51 mac001 1200DPI 90LPI