USER’S GUIDE COLOR MONITOR Model No : 907D/907DF http://www.dwe.co.
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Emission Characteristics Tested by SEMKO A sample of this type has been tested and has shown compliance with theguidelines in the swedish document MPRII. DECLARATION OF CONFORMITY This product is also designed for IT power system with phase to phase voltage of 230V. We, Manufacturer / Importer DAEWOO ELECTRONICS CO., Ltd 686, Ahyon-dong, Mapo-gu, Seoul, Korea The power cord is used as a main disconnect device. Disconnect the power cord before servicing.
CONTENTS Introduction ............................................................................. 1 Product Features ................................................................. 2 Setup ......................................................................................... 3 Connecting the Signal Cable and Power Cord..................... 3 Operation & Adjustment ...................................................... 4 Specifications ..................................................................
SETUP PRODUCT FEATURES CONNECTING THE SIGNAL CABLE AND POWER CORD The convenient and user-friendly on-screen display allows for easy and accurate adjustments of horizontal and vertical screen size and position, geometry and screen color. The monitor supports a safe working environment in strict compliance with the MPR II standard for low emissions (TCO Optional). The monitor complies with the VESA Display Data Channel (DDC) specification for Plug and Play compatibility.
OPERATION & ADJUSTMENT KEY PROCESS CONTROL PANEL MENU 1 POWER 2 POWER Indicator shows both normal operation and power management status with power indicator light. swithes the monitor on and off. 2 BRIGHTNESS MENU 1 MENU CONTRAST MENU 7 3 6 5 4 (*) 3 4 6 turns the OSD window on and moves from top menu to sub menu in the OSD window. OSD OFF (*) moves cursor to the left window in the OSD window and decreases value of any selected function.
OSD FUNCTIONS ICON CONTROL FUNCTION ICON CONTROL FUNCTION LANGUAGE Select language for OSD (5 languages). H MOIRE Adjust the horizontal picture moire cancellation. H. CENTER & Adjust the position of the display horizontally(left or right) and vertically (up or down). V MOIRE Adjust the vertical picture moire cancellation. FOCUS Adjust the focus image. ZOOM Adjust the display width & height at the same time.
SPECIFICATIONS ICON CONTROL FUNCTION DEGAUSS Degaussing keeps the monitor free from unwanted magnetism that can result in color impurity. STATUS Display horizontal & vertical frequency and polarity. POWER SAVER YES : VESA DPMS operation. NO : NO DPMS operation. RECALL Reset the screen to the Factory Preset Display Settings. TEST PATTERN Display a RGB Color Bar to determine whether the screen color is expressed normally or not.
TROUBLESHOOTING Symptom No picture. Check Check if power switch and computer power switch are in the on position. Check if the signal cable is correctly connected to the video card. Check if the pins of D subconnector are not bent. Check if the computer is in the power- saving mode. POWER LED is not Check if power switch is in the on position. lit. Check if the power cord is correctly connected. Image is unstable. Check if the signal cable is suitable to the video card.
