User's Manual
Model Names 907D 907DF
English - 8
English - 9
SPECIFICA
SPECIFICA
TIONS
TIONS
Mode H.Freq (KHz) V.Freq(Hz) Remark
VGA 480 640
X
480 31.5 60 Non-interlaced
VGA 400 720
X
400 31.3 70 Non-interlaced
VESA 43K 640
X
480 43.3 85 Non-interlaced
VESA SVGA 85 800
X
600 53.7 85 Non-interlaced
VESA 60K 1024
X
768 60.0 75 Non-interlaced
VESA 1024/85 1024
X
768 68.7 85 Non-interlaced
VESA 1280/75 1280
X
1024 80.0 75 Non-interlaced
VESA 1280/85 1280
X
1024 91.1 85 Non-interlaced
Resolution
(dots
X
lines)
CDT Size 19-inch 19-inch DynaFlat
Diagonal visible image area 18-inch 18-inch
Dot Pitch 0.25 mm 0.24 mm
Synchronization Horizontal 30 - 95 KHz
Vertical 50 - 160 Hz
Plug and Play VESA DDC Compatible
Power Saving EPA, VESA DPMS, Nutek Compliant
Power Source 100-240 Vac, 50/60Hz (Free Voltage)
Power Consumption 120 W
Dimension-W x H x D 444 x 459 x 460 mm 444 x 459 x 458 mm
(set with stand)
Weight-unpacked(lbs/Kg) 40.8/18.5 45.6/20.7
Operating Temperature 10 ~ 40°C /50 ~ 104°F
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. The Self Diagnosis function
checks if the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when the
D-Sub signal connector is not connected
or the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when
the applied frequency is under or over
normal range.
Normal range
H : 30 - 95 KHz
V : 50 - 160 Hz
Reset the screen to the Factory Preset
Display Settings.
Display a RGB Color Bar to determine
whether the screen color is expressed
normally or not.
TEST PATTERN
RECALL
Display horizontal & vertical frequency
and polarity.
STATUS
POWER SAVER
YES : VESA DPMS operation.
NO : NO DPMS operation.
ICON CONTROL FUNCTION
SELF DIAGNOSIS
F
F
ACTOR
ACTOR
Y PRESET TIMINGS
Y PRESET TIMINGS
Degaussing keeps the monitor free from
unwanted magnetism that can result in
color impurity.
DEGAUSS
The specification can be changed without any prior notice to improve
the quality of the product.