User's Manual

English - 15
SELF DIAGNOSIS
English - 14
SOUND
Adjust the hues of image.
HUE
Adjust the display image quality (if the
screen proceed to scaling up).
SHARPNESS
Adjust high frequency response.
TREBLE
Adjust low frequency response.
BASS
Balance audio sound.
BALANCE
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is “No Signal”, “Out of range” or “Check Cable”.
“No Signal” screen is displayed when the
D-Sub signal connector is connected and
the status of the monitor is on DPMS
mode.
“Check Cable” screen is displayed when
the D-Sub signal connector is not
connected.
“Out of Range” screen is displayed when
the applied frequency is under or over
normal range.
Normal range
(Non-interlaced mode only)
H : 30 - 62 KHz
V : 50 - 75 Hz