User's Manual

AC POWER
12V DC
S-Video
Video
AUDIO
R
L
AC POWER
12V DC
S-Video
Video
AUDIO
R
L
English - 5
CONNECTING THE SPEAKERS
English - 4
1. Turn off the computer and monitor.
2. Connect the 15 pin signal cable to the output port of the video
card in your computer and monitor.
3. Tighten the screws of the 15 pin signal cable.
4. Plug the power cord into the AC receptacle located on the back
of the monitor.
5. Plug the other end of the power cord into the AC outlet.
Power
Cord
CONNECTING THE 15 PIN SIGNAL CABLE AND POWER CORD
Speaker R
Speaker L
1. Align the two hooks on each speaker with the holes on the right
and left side of the monitor and insert the hooks into the holes.
2. Plug the connector of the POWER (DC IN 12V) Jack of the
speaker R into the 12V DC(AUDIO POWER) port on the
rear of the monitor.
3. Plug the connector of the MONO Jack of the speaker R into
the input port of the speaker L.
4. Plug the connector of the STEREO (AUDIO INPUT) Jack
of the speaker R into the SPEAKER port on the rear of the
monitor.
5. After setting up the speakers, switch the power on and adjust
the volume to the proper level.
1
1
2
2
3
3
4
4
5
5
7
7
6
6
: Headphone Jack
15 pin
signal
cable